Soundlab Dynastats


I have just moved a pair of Soundlab Dynastat speakers into my listening room.
I am guessing they are 20 years old but not sure.
Can anyone offer background on the speakers and suggestions on setup?
Thanks in advance for your input.

thermals1

I have the SoundLab A3-PX speaker and have been experimenting with speaker positioning and front wall (behind the speaker) acoustical treatment options for the past year. Assuming your speaker is similar to mine here are my insights:

* Speaker to Speaker Distance - as my room is only 135" wide I have my speakers quite close to the side walls with the distance between speaker centre points being 90". Given the large speaker size they can stand to be relatively far apart so start with them being 8' apart and try larger/smaller distances. Keep in mind that if the speakers are close to side walls that the concave rear firing sound will tend to fire into the side wall and room corner which will likely smear musical details, so to compensate you'll have to pull them out from the front wall about 6'(73") and have them firing straight ahead or with just a small amount of toe-in. Try and avoid directly firing into a room corner because untreated it sounds bad and treated with absorption it kills the "aliveness" of the rear wave and total presentation in my opinion.

* Speaker to Front Wall Distance - as a minimum you should aim for a 10 milisecond delay from the back of the speaker so that the rear reflection is not perceived as a separate auditory event from the front firing wave, and that its loudness can be matched with the forward firing wave. 10 miliseconds means having your speakers out from the front wall about 73.5"  (1225*0.01) / 2 = 6.125' or 73.5" I've tried larger distances but the greater time delay of the rear firing wave created an echoey kind of sound. When shorter distances were used, the sound stage depth collapsed and phase issues seem to arise smearing musical details or shifting image specificity.

* Speaker Toe-In - If your sitting distance can be 1.5x times your speaker to speaker distance then try no toe in or very little. Nearer field sitting will of course require more toe-in. To each their own.

* Speaker to Listening Position Distance - SoundLab recommends a 1.5 - 2x sitting distance so this really depends on your room length as your main constraint.

* Front Wall Acoustical Treatments - Absorption kills the rear wave and changes the speaker's sound to one of giant headphones which is also not as loud because you're not getting any loudness from the rear wave (but you can turn up the vol control).  The focal point of the convex rear speaker shape is about 3' so you can try standing diffusion up about a foot behind the focal point to see if you like the effect.  My preference is to embrace the rear waves and let them reflect off of a wooden front wall (I covered the front wall with 8'*4' oak planks which sound better than drywall reflections - more alive sounding) but with absorption on the side wall that's behind the speakers to kill slap echoes. I have diffusion mid front wall. In short, the less treatment on the front wall the more alive sounding it becomes which is better to me than the headphone effect when thick absorption is used.

* Side Wall Treatments - with my speakers projection sound in a 20degree arc there is the need to treat 1st side wall reflections to smoothen out the freq curve (I use a Dayton Audio OmniMic for acoustical measurements). I use absorption at the 1st reflection points.

* Rear Wall Treatments - rear wall should be a mix of thick bass trap absorption and diffusion in front of it. Make sure that you're not sitting too close to the diffusion though. I use two rows of 7" thick GIK Monster bass traps with an air space between the back wall and the first row and between the two rows, and 4 GIK TriTraps fitted together in the shape of a rectangle that the second row of Monster traps stand atop. I also use 7-8 RPG Skyline diffusers that are also 7" thick in front of the bass traps.

Hope this is mildly helpful
Thermals, imo the Dynastat is an excellent loudspeaker which gets overlooked because its fullrange-panel big brothers are what everyone focuses on.   

Regarding setup:  

Like other dipole speakers, the Dynastats benefit from having a fair amount of space between themselves and the front wall, to allow for a suitably long time delay before the backwave's reflection arrives at the listening area.   I'd suggest 5 feet but if that is not possible then try to diffuse the backwave.  You can place bushy plants like ficus trees to intercept the backwave bounce that's would otherwise be heading straight towards the listening area.   

Since the bipolar panels of the Dynastats have a null to the side, they are more tolerant of being placed near the sidewalls than most speakers.  

Something you might want to be aware of is this:  Sound literally falls off more slowly with distance from the line-source-approximating panels than from the point-source-approximating woofer.   So up very close, and the woofer will be louder than the panels.  Back too far, and the panels will be louder than the woofer.  You can use the bias control on the panels sort of like a level control if the panels are too loud.  The woofers have their own level control.  

If the bass is too heavy, you add stuff the port with some open-cell foam.  Make sure you can easily breathe through the foam.  You can get open-cell foam at a fabric shop, and you probably will not need a very thick layer in order to remove energy from the port's airstream.  

Duke
@decooney
I hope to own a pair of nice SoundLabs some day. :)

When I had the space, I didn’t have the funds. Now I have the funds (at least for a good used pair), I don’t have the space. Oh, well -- I hope you do get a nice pair!
@thermals1
If they are the 6’ tall Dynastat version less than 2’ wide, maybe 3" thick, and can be bi-wired..., they may benefit from really good solid state amplification. Placement and direction towards the listener can also be room and amplification dependent. i.e. depends on amp(s) are being used too.

My local dealer has been a Soundlab dealer for as long I can remember. Heard various new and reconditioned models with higher power (80-100w) mono block tube amps with big transformers primarily. Maybe once a while ago with a single 200wpc Pass Lab amp. I remember thinking I wanted to hear them again with a pair of 200wpc monos.

I was there to demo my own Quicksilver Mono 120 amps on a larger pair of the Majestic 845PX (94") tall versions, and while they were interesting sounding, I kept thinking I’d like to hear the shorter/narrow ones with only 100wpc tube power.

+1 mike_in_nc,
what he said, pop over to the SLO group for sure.

If the speakers are in good condition, not needing restoration or panels replaced, may be worthy of some nice amplifiers to yield their best sound. I hope to own a pair of nice SoundLabs some day. :) Good Luck.