Gain versus volume


In a non technical format can one explain the difference between raising the volume up on your pre-amp versus raising the gain setting on your phono pre-amp.
For example: raising my volume control on my Aesthetix pre-amp to a higher level versus raising the gain on my Rhea for 62db to 68db???

Tks!

Rick (RWD)
rwd
Agree with Onhwy1.

Your active linestage should operate centered at about 12-1:00 at moderate volume.
There's no difference between increasing gain at various points in your system. The goal is to have the various stages adjusted such that they all operate in their most linear ranges.
Yes...my Rhea is very quiet. So as I understand this....gain and volume are both the "same"....correct?

Thanks for helping understand.
Having the ability to select gain on your phono preamp gives you the flexibility to match the gain of your vinyl rig with that of other sources feeding your preamp (e.g. a cd player) so that whether you are listening to vinyl or cd your preamp volume control will operate in the same region. Keep in mind that setting the phono preamp at the higher gain setting may introduce more residual noise from that device which will depend on the downstrean gain of your system. I assume that the Rhea is quiet regardless of the gain setting chosen.
If I understand your question correctly: The "volume" knob on your preamp IS a "gain" control. Hence- There is no actual difference since the are both really amplifiers(one a pre-amplifier and the other a pre-pre-amplifier). As Mr V stated: The one you choose to increase your "gain" through can impact your signal greatly.
Which one sounds better?

If your preamp was a lot better than your Rhea, you might want to use the lower 62db setting on the Rhea and turn up the volume on your preamp. If it was the other way around you might want to do it differently.

The distributor will be able to tell you what the recommended gain setting is for your cartridge. To further complicate things, if you have a Calypso, there are a couple of user accessible internal jumpers that lower/raise the gain by 12db that can impact on how your preamp/Rhea sounds.

I have a XYZ for which it was recommended I use the highest 75db setting but I'm not sure if that was for balanced cables. That setting picked up too much surface noise for my liking and I've been using 68db balanced instead. Love it.