DAC Output 192/16 vs. 192/24 Will I Hear A Difference


I am planning on purchasing a DAC in the near future and although I have done
some research, I am not clear on some of the technical aspects. I will be streaming
Qobuz from a Node 2i to an external DAC.

With Qobuz, will there be a difference in audio quality with a DAC that outputs
192/16 vs. 192/24? If there is a difference, will it be audible?
I am not interested in DSD.
Thanks.  
ericsch
there are no dac chips that can do higher than 16/44 but can't do 24 bit. why would a dac builder limit bit depth but higher sampling rates?

i think we are talking about a non issue here. 
Found a great article on Wikipedia:

https://en.wikipedia.org/wiki/Audio_bit_depth

Pay particular attention to the dynamic range section, you can see that the dynamic range of the 24 bit data exceeds 144 dB, which is hard to actually do in real life due to typical noise issues. At this point it's just bragging rights.
In my room/system and using Foobar's "comparator" I could distinguish 24 bit files from 16 bit files but not 44 kHz sample rate from 96 or 192 kHz.Still, I cannot imagine having a DAC unable to decode at least 24/192 files.
The sample rate and size is about the digital signal. For instance:  44.1 kHz / 16 bits.

A DAC has to take a digital input, but outputs an analog signal for which the terms sample rate and bit depth no longer apply. So, when you read the spec's of a DAC, it's talking about what kind of sources it can support, but the output is always going to be analog.

Streamers are a little more complicated as the input is some network attached service and the output is either (or both) a digital signal you can feed a DAC, or if it is a Streamer/DAC an analog signal.

In any event, if you exceed the specs of your DAC you won't get a good sounding signal. :)
In my opinion, the bit depth is actually probably more important than the sample rate with respect to delivering SQ, all things being equal. So I wouldn’t want my bit depth limited to 16 bits, although I could easily live with a sample rate that tops out at 192.
Yes, I know there are other things to consider and implementation matters. It's just that some users will say such and such DAC inputs up to some spec, but does not output to the same spec. Confusing to me.  
Haven't seen any Qobuz tracks that are 192/16. Your Dac may quote this spec. 
192/24, 96/24, and 16/44.1 on Qobuz as far as I know.

op,
    I do not have the "ear" that many of the established long time members here have.  My system is resolving enough for me to clearly hear quite a difference between standard 16/44 and 24/96.  At my skill level the move from 24/96 to 24/192 is much harder for me to pick out. That is my honest answer. I am 54 and do not have the ears of a 30 year old anymore. I think the original source material plays a large part.  IMO a quality DAC with an excellent analogue stage is a very wise decision. Money well spent. Cheers. 
agree with erik...that spec, and other specs, are often only a small part, and don't need to worry about what chips are used as there is way more to good sound than that alone...
Doubtful this spec alone will guide you.

I'm curious, are there any DAC's which can do 192/16 but NOT 192/24??