fld
Responses from fld
| Turntables better than a Wadia 861SE w/ Statement you cannot really compare analog and digital. as many said, both formats are quite different especially in presentation.im using a hi end cd player from accuphase. it sounds very good by all means, but i always prefer to listen to my analog rig. i... | |
| Phantom B44 overhang concern thanks for the informative info... Thank you! | |
| Which cart works with Ortofon AS309S 12inch arm Thank you Mrmitch... | |
| Graham Phantom B44 Specs Syntax,thanks for chiming in. If you don't mind sharing, which carts (s) you tried didn't work too well with the Phantom arm ?Many thanks in advance for sharing this info. | |
| Graham Phantom B44 Specs Thanks again for the help guys! enjoyed reading your experiences, etc.Mr Graham replied to my email.This is what he has to say."Effective mass is around 14 grams; the actual number is not so important, as sometimes the cartridge measurements chang... | |
| Which cart works with Ortofon AS309S 12inch arm anyone here know what the arm mass ofthe as309s ? | |
| Graham Phantom B44 Specs i tried looking for the specs over the net & couldnt find any info. Anyone else care to chime ?Thanks for the reply audioliu. | |
| Which cart works with Ortofon AS309S 12inch arm Thank you for the replies! | |
| Which cart works with Ortofon AS309S 12inch arm Based on my limited research, there are 4 diff headshell options: 12g, 13.5g, 8.5g and 16.8g.The std counterweight is 18-25 grams.correct me if i'm wrong.if a cart is say 7.1g & I use a 13.5g orto headshell,that gives me a total weight of 20.6... | |
| Classical Music LPs recommendations Other than acoustic sounds, musicdirect and audiophileusa, any other place were we can buy these LPs cheaper ?thank you for the inputs | |
| Classical Music LPs recommendations Any more suggestions.Trio, appreciate how you organized your choices. Makes it easier to hunt in acoustic sounds website. | |
| Classical Music LPs recommendations thanks for the list guys! keep it coming!! | |
| Exactly where is the pivot point of Dynavector 507 Hello doug,that is of huge help!!my 2nd concern.Once I find that exact pivot point, the spindle to pivot point is 226mm for the 507 mk2.I set the stainless ruler for that, move the armboard so it be that distance. done!Unfortunately, when i set th... | |
| Exactly where is the pivot point of Dynavector 507 agree! mint proctractor is really accurate.i guess i will just have to play around with it till i get to make the sound right. | |
| Exactly where is the pivot point of Dynavector 507 anyone else shares this knowledge ? would appreciate it highly. thank you |