2. tech-talk
  3. 1360552056

USING SPEAKER TECHNOLOGY TO KICK OPEN DOORS

USING SPEAKER TECHNOLOGY TO KICK OPEN DOORS

The idea I propose is simple and I'm sure some of you already know where I'm going with this, so here goes. Take a simple piece of pipe the same diameter used on police door rams, add a series of coils along it's axis, and a solid steel slug free floating inside the pipe. Add current and bang! The slug should be propelled from one end to the other. This combined with a well timed swing of the ram should increase the amount of force applied, bringing down any door. The main idea here is to reduce the weight of the ram while simultaneously increasing the amount of force applied. Also, the coils could be powered by a capacitor bank on the ram and charged before using it.

I haven't built a prototype yet or even looked to see if someone else has done this. So any information or ideas about this project is greatly appreciated. I do not have a background in electrical engineering or any thing like that, just an over active imagination. And I never want to carry a ram up 10 flights of stairs ever again. It may sound simple but every ounce counts, especially when you're in body armor and wearing who knows what else you might need. I will give credit to anyone that can contribute idea's or thoughts, that could solve this problem, if someone else hasn't already, that is.........
dynami28
plato
1,543 posts
 
Wow, I've gotta say this is one thread I didn't see coming. What's next? Maybe adapting blu-ray lasers for interrogation!

Oh, the poor SWAT guy has to carry a heavy implement of destruction up flights of stairs before he can crack heads and shoot people. Life's just so unfair. But I'm sure you get a great benefits package, eh?

But if you do come up with this solenoid-assist battering ram make sure you get the proper credit and they name it after you. I guess it's a dubious honor in a land where any kind of honor is scarce at best. And if the electric angle doesn't work out then perhaps you should look into a compressed gas-pulverizer... with adjustable ranges of force so it could also be used to brutalize suspects. After all, repeated punching can get very tiring and why risk busting a knuckle on that kind of scum?
nonoise's avatar
nonoise
10,651 posts
 
Plato, I could have sworn I heard angels laughing at that one.

All the best,
Nonoise
ebm
9,311 posts
 
What a joke Dude!!
picfink
8 posts
 
this sort of thing already exists...in labs.
Timing is everything in releasing the capacitor charge.

Look up 'Rail Gun'.....

It is not 'recoiless' so if you have a couple guys holding the 'ram' when it fires the slug, the ram tube will recoil backwards..........and not deliver full power to the slug intented to breach the door or whatever.

I Floated a proposal to make an electromatnetic railgun Punkin Chucker, but couldn't get my engineering buddies to want to help! Imagine being the first person to put a pumkpin in ORBIT via railgun.
dynami28 OP
55 posts
 
Thank you all for your comments, I honestly expected them to be much worse than they are.......

I have to say that the rail gun is part inspiration for this idea. Just cap off the ends. I also like the idea of using a pressure switch to eliminate timing issues. The other part of inspiration came from that flashlight you shake back and forth to charge it, perhaps it could be utilized to help charge the system. And as stated above (by Tsugury)I have never had an issue with the way current equipment works, however when in country where you have to carry everything you need, the weight becomes a serious issue. And as for the Punkin Chucker I have to say that I found that the pumpkin would (unfortunately) shred far before achieving orbit like velocities. Perhaps I should try a sabot system next time.....

Please keep the ideas coming,
Andrew
More to discover