A mystery for you tech gurus out there


Hi all -

I am stumped, to say the least, at what could be going on with my home theatre system. My equipment hooked up is:

-Denon 1913-AVR receiver
-Dual CS7000 (Golden one) turntable (grounded to a casing screw on the receiver case)
-Marantz 5 disc CD changer
-Front speakers: Paradigm studio 60 v1
-Center and surrounds: Sony
-Klipsch subwoofer
-Panasonic plasma TV

So the issue revolves around the front Paradigm Studio 60s. Whichever one is plugged into the FRONT LEFT speaker output on the receiver emits an occasional, loud pop. Usually the pop comes in bursts, and sounds almost like a fireworks show would with a succession of airy-sounding, concussive pops.

I thought it was my receiver (I originally had a Denon 1911-AVR giving me the same issue) and recently got the 1913, and the issue persisted. I have tried using new speaker wire as well. The part that I cant figure out is when i go behind the receiver and switch the 2 front speakers around so that the speaker that was right is now left and vice versa, the popping now comes out of the right sided speaker which is now plugged into the FRONT LEFT output.

How can this be? Any thoughts or ideas?
-
snwbrdrcol
I agree with Zydo about the source's as the popping occurs at any and all inputs ... also agree with Zydo that it isn’t the speakers as the popping stays with the amp's output and does not follow the speaker

I even think your receiver is OK ...

What I think is causing the popping is that amp’s channel is not balanced correctly to the other channels and is putting out a little more power than the rest of the channels ... causing that channel to clip on peaks

This is causing the ...
"occasional, loud pop. Usually the pop comes in bursts, and sounds almost like a fireworks show would with a succession of airy-sounding, concussive pops".
... you are experiencing because the input to that amp is set to high relative to the others amp's inputs in the set up menu

Try turning the main volume down 20% and see if the popping continues ... if it stops then that amp is clipping and needs to be readjusted in the menu ... if the popping continues even at the much lower volume ... I would suspect an issue with the receiver

Maximum capacity is a rating ... not a challenge

.
+1 Davehrab, you may have just salvaged this thread with a note of clarity for the original qn. If the OP hasn't abandoned in frustration, I suspect that he'll know by now whose hijacking posts he should just ignore.

The original description suggested possible clipping to me as well, but I couldn't envision what might cause this in a single channel for a solid state amp. The channel balancing issue might just be the solution, but in general, I wonder what else could be at play?
Is it possible that someone needs to brush up on their Dale Carnegie? The question does assume that the person wants to be liked by others. Anyway, here's a brief synopsis of some of Mr. Carnegie's most core techniques.

Fundamental Techniques in Handling People --
Don't criticize, condemn, or complain. Give honest and sincere appreciation. Arouse in the other person an eager want. Never show others that you are not interested in what they have to say.

Twelve Ways to Win People to Your Way of Thinking --
The only way to get the best of an argument is to avoid it. Show respect for the other person's opinions. Never say "You're Wrong." If you're wrong, admit it quickly and emphatically. Begin in a friendly way. Start with questions to which the other person will answer yes. Let the other person do a great deal of the talking. Let the other person feel the idea is his or hers. Try honestly to see things from the other person's point of view. Be sympathetic with the other person's ideas and desires. Appeal to the nobler motives. Dramatize your ideas. Throw down a challenge.

Regarding the OP, it could be some outside electrical interference being picked up by a interconnect/cable on the left channel. Try repositioning.
Sandstone ... this is what qued me
-Denon 1913-AVR receiver
It's a HT receiver not 2 channel receiver and requires balancing of input signal to all channels including sub for balanced response

Turn one channel’s input up a little to much in relation to the others and it will clip before the others

OP descript sounded like clipping to me

.
Snwbrdrcol, have you switched interconnects/cables around?

The chickens always do come home to roost, don't they.