2. amps-preamps
  3. 1299032099

Hafler XL600 Vs Hafler 9505 Much difference?

Hello all, I am new here and still learning to navigate the website. I have been out of audio for a number of years. I had an old Hafler XL600 years ago and really liked it for the price. I am thinking of getting into audio again and am considering purchasing either an XL600 or the newer Hafler 9505/9500. I have read there have been a lot of improvements in amplifiers in the last decade. Is that true? How much difference is there in the amps I am refering to? Would I notice a difference between the XL600 and the newer amp? I hope to purchase Boston Acoustics VS336 speakers to go with this.
Any info would be helpful.
Thanks
sundriednm
ewzuber
1 posts
 
It is my opinion that the XL600 and the 9505 do have similar sounds. Only got to audition the 9505 one time though and it was not on long enough to really get warmed up. I own two DH220's, one DH200, one XL600 and a Pro5000 and a DH110 preamp. Been buying defective units and fixing them in my retirement. Just recently got the XL600 and it does sound nice and smooth, IMO. However, strangely I find that the Pro5000 seems to have the most clarity of them all. A good recording on the 5000 sounds like it is taking place right in the room.
sundriednm OP
15 posts
 
Well, my XL-600 is having problems in one channel now, so I will be taking it to a repair shop. Maybe I will buy an upgrade kit for it as well. Hopefully, the Amp sounds more like the 9505 then?? Thanks for your feedback.
I have never heard a Pro5000 before. I will check out prices on that.
Thanks
rodman99999
5,988 posts
 
Chances are good that what you're hearing as a, "bass problem" with the 9505, is a case of expiring power supply filter caps. I've been using mine to power the bottom of my actively bi-amped system, for a number of years. My filter caps went south, about three years ago(symptoms appeared earlier, of course). The differences would be much more noticeable(across the board), if the amp was used full musical bandwidth. Especially given that you seem to enjoy cranking your tunes. These made a world of difference, but you have to leave the top off the amp, as they are slightly taller than stock: (http://www.digikey.com/product-detail/en/B41456B9229M/495-4228-ND/2269437)
rodman99999
5,988 posts
 
Should have mentioned; those caps are slightly(10%) over the stock uF value, very low ESR and long life. You can further improve your 9505's presentation, with a pair of these(easy to install) FRED bridges: (http://datasheet.octopart.com/VBE17-06N07-IXYS-datasheet-143416.pdf), higher quality binding posts and RCA's, all of which can be gotten from Michael Percy: (http://www.percyaudio.com/Catalog.pdf)
sundriednm OP
15 posts
 
Ok, assume I know nothing about audio, as that appears to be the case. :) What is a FRED bridge?
More to discover