Best EL-34 Amps?

hi joe:

thanks for your timely observations. i am looking into a cj mv55 and a dynaco stereo 70. they may offer a bit more of a euphonic character than either the quicksilver amps or the consonance amps.

i am somewhat disappointed with many tube amps in current production. they don't present a classic tube sound, like the older mcintosh, conrad johnson and audio research amps.

the exception is the wavelength amps, which are very expensive but lean more to the vintage than modern tube sound.

Mrtennis, based on most of what I read from you over time, I would think these two products would suit you very well.

I am currently playing with my own Dynaco ST70 right now that I just built over the summer. It's an incredible product to say the least. Especially, in light of the pricing.

Replacing the stock Sovtek 7199 with a pair of RCA yielded more of an improvement than I've ever witnessed with any other tube component. This change alone raised the letter grade I put on the amp from a C- to a solid B (borderline B+).

For less than $1000, you get an amplifier that isn't the last word in low frequency response, but otherwise pretty much sounds as good as anything else produced today. In fact, I probably prefer its midrange to any Consonance push-pull tube amplifier. I need a bit more time with it before I can say that with 100% confidence, but I probably won't be able to fit it in until after RMAF2008.

I haven't experimented with rectifier tubes yet, but, from having a very weak one in there initially, which caused my readings to be way off when I checked the various voltages through the amplifier, this tube is of critical importance as well. So, I will seek out a good older tube to replace the EH 5AR4 and see how much the amp can put out in bone stock form before making the mods I intend to down the road. Overall, it's been an incredibly fun and illuminating project for me.

Joe,
same on this side of the fance.
I am in the mid-process of restoring my Scott 299B integrated amp. Since I am quite bussy with the other stuff, I just might have one of NY Rave members do the work for me.
All in all, it is hard to beat for $280 used and another $100-$200 for restoration and mods. It came with some very nice NOS tubes already.....It sounds very, very sweet.
IMO it is not the last word in resolution or bottom end but mids are very seductive to say the least.

MrT. let us know what did you end up getting.

Cheers
Mariusz

I highley recommend the Air Tight ATM-1 amp. There's one for sale right now on Audiogon for $2700.(With the Mullard rectifier tubes and Seimens EL 34s). If I had the money, I would buy it now.

These Cayin 860 monoblocks are worth considering. Shameless plug warning....

If you love the luscious, warm, rich, textured sound that only tubes can optimally deliver, explore this Cayin line of gear. These were voiced to match the classic sound of the famous Marantz 9 power amps.

These 860 mono amps are hand-built and feature point-to-point wiring. Each of these monsters weighs in at over 40 pounds. This is classic, heavy-duty tube gear. 70 Watts (Ultralinear) or switchable to 38 Watts in Triode mode.

Can operate with EL34, KT 88 or 6550 driver tubes to fit your needs.

I purchased these new early last year (2007) and have had significant upgrades ($1200) done after consulting with Sonic Craft (Sonicraft caps, Cardas caps, Mundorf & Blackgate caps, precision resistors, discrete ultrafast/quiet diodes, Cardas wiring, +++). Have orignial tubes (EH and Cayin) plus upgraded set of NOS Mullard tubes, and new reissued octet set of all new EL34 Mullards. Many more details and pictures available.

They are really sweet amps. I run them with my Modwright LS 36.5 and Merlin VSM-MMs. The Cayin gear is super quality bang for the dollar (point to point wiring, solid chassis, massive transformers, etc).

You can find out more details at Acoustic Sounds website as they sell them and had them in one of their demo rooms with Harbeth speakers. I recently posted these for sale on AA and AC.