PC for Brsyton 4B SST

Thanks everyone for trying to help me.

Here's is an update to my situation. I went today to a local stereo shop and explained my problem. He suggested that I purchase a Audiophile APS unit. The 700 watt version retailed at 2700.00 Cad a bit out of my price range for now.

Just to set things straight I've tried disconnecting my cable entirely and the buzz still remains. The video is hooked up to my Monster Power Bar and from there to my TV.

All of my components except my amp are hooked to my power bar. The outlet I'm using is a switched one by that I mean a wall switch cuts all power. I've tried tackling this problem before by unplugging all house app and switching outlets the buzz still remains.

I thought some fresh blood this time around might give me some fresh insights.

Many Thanks

Tvad,

I agree with you about the power conditioner.

My reciever is for now operating for both 2/ch and HT duties.

Yes it is correct when the reciever is not connected to the amp and both are turned on there is only a slight hiss. The hiss does not increase with the volume a good thing right.

With the reciever and amp connected and both turned on the buzz returns. It also returns when my amp is taken out of the loop and the reciever running the whole show.

You mentioned the use of a wire can you give me any suggestions.

I have a better repore with another store a different one but I haven't asked them. Next time I visit them I will.

Tommorow I will call Bryston and find out about a ground screw and I'll try the same with Nad.

Unfortunately I bought the amp from a fellow Audiogoner.

Yes the amp is for amplifying the Lt and Rt channels. It might take some doing in obtaining a loaner piece of any kind, but I'll try nonetheless.

What would it mean if I try the wire test and the buzzing goes away or stays the same.