2. cables
  3. 1052917627

In wall power cabling- for Apartment Dweller

Howdy.

I need some advice on what kind of in wall power cabling (reasonably priced to cheap) is a step up from whatever my Landlord's go-to electrician would pick up at Lowe's to do the job.

I'm going to be installing 2 dedicated lines, and I need some knowledge on what brands of cable to use. Also, I won't be purchasing "audiophile Grade" circuit breakers, if they are expensive, but anyone have knowledge re: circuiut breakers- i.e. 15 amp, etc and some manufacturers that make them better than others, etc...

I've got my "Porter Ports" on the way (thanks again Albert!)
and I need to know what to do next.
Keep in mind that, once I move, 100% of my investment will be lost, so I'm not going to be purchasing anything that is really expensive.

THANKS!!!!
gthirteen
bob_bundus
1,834 posts
 
simply use #10awg solid copper THHN conductors - inexpensive, so no problem leaving it behind. Cable designer Mike VansEvers advised that it's good enough for him & it's certainly doing me a fine job too. One single circuit runs the whole works.
Breakers are pretty much dictated by the manufacturer of the distribution panel - you have to buy what will fit there.
hbarrel's avatar
hbarrel
342 posts
 
Standard circuit breakers.
15 Amp breakers @ 104volts (I doubt you really have 110v) is good for 1560 watts.
Unless you have some sort of monster equipment that requires huge amounts of current 12-2 wire is more than enough.
The Psyco's solution isn't half bad. Unless you have kids running around.
psychicanimal
1,738 posts
 
Here's the *compact* solution: get a Richard Gray Power Co. unit, a DeZorel Filter with two or three bricks and an ACME silver plated cryo'ed receptacle...
gthirteen OP
349 posts
 
THanks guys.
My inquiry was directred at what in-wall cable to use.
I was planning on just running 2 lines, 1 analog (TT, phono preamp, and Integrated amp) and one Digital (CD, SACD/DVD/CD).

I don't have any monster amps, should I just get 2 15 amp breakers?- one for the digi and one for the analog- or get a 20 amp brreaker for the amp, etc?

CABLE NOMENCLATURE-

12-2 wire = 2 12 gauge conductors, AND A GROUND?

What is THHN???

THANKS GUYS!!!!!!!
lak's avatar
Ag insider logo xs@2x
lak
4,529 posts
 
If that's the case go with two 20 amp breakers and #10 wire just to be picky.
More to discover