Comparing Audioquest cable to Morrow

I've got both Morrow and Audioquest cables. MA-3 for the interconnects, and Audioquest Type 4 for speaker cable. I really like both for what they bring to the final sound.

The biggest change for me was tossing my lamp cord speaker cables(12 gauge fine strand copper, ofc) for the Type 4. They brought focus and accuracy, which improved the imaging. They made me a believer in solid conductors rather than fine strand.

The MA3 give more detail and resolution, but I had them before I changed out the speaker cables, so the results may have been partly masked by the inferior lamp cord. Anyway, I found that it's all important, but you need speakers capable of good resolution to hear a difference.

I've talked to Mike Morrow too, and was impressed with his knowledge and manner. His cables are the real deal, and he regularly has sales, so I'd buy then.

ok. I'd still like to know if the CopperHarmony connectors are significant. If they were, probably would be hearing more about them by now, though.

Lynne, if you didn't care for Nordost, chances are that Morrow will not work for you either. Since both manufacturers use silver plated copper conductors. I am not a fan of silver plated copper. I find pure silver to be as resolving, but more natural sounding.

If forced to pick between these two, I guess I would choose AQ, since they do not use any plating on their conductors. Obviously, YMMV.

Thanks, John. Very good to know.

BTW, I did contact Steve Nugent. He says he does not make cable anymore, although FYI, he says he has a new killer digital coax that buries the older one for $250. I don't know which one I have, but the one I have is extremely good and I paid $250 for it.

Lynne,

I have Morrow MA6 IC's and I prefer them to the various audioquest IC's I've had. I have no experience with Morrow speaker cable but I do have a Clearday Double Shotgun cables used very little. They're too much for my speakers that are on the bright side. I could sell Them, message me if you like.

Lance