2. misc-audio
  3. 1376689830

Non-Latching or No Latch Female XLR Connector

My gaer has the non-latching or no latch female XLR connector installed as input. This is the first time I have a machine with such connector. Usually it would have a "PUSH" botton at the 12 oclock position for you to push in to release the cable.

Now without such "PUSH" botton, how can I change the installed cable if I want to try different cable later?

Hope someone had experiences with non-latching female XLR connector can provide the proper way to release connected cable.

Thanks in advance.

Otto
yu11375
yu11375 OP
137 posts
 
Hi Rodman99999,

I do like the sound from this gear. Unfortunately I am not good at soldering. I am thinking to put the XLR-RCA adopter as temporary solution.

Thanks!
guidocorona
4,298 posts
 
Hi Otto, what is the manufacturer and model of the machine/device having these problems?

Thanks, G.
rodman99999
5,984 posts
 
Hello again Otto- You may find an audible signal degradation with an adapter, if the rest of your system is very resolving. Hopefully- you won't!
yu11375 OP
137 posts
 
Hi Guidocoroda,

I don't consider it's a problem, just inconvenience. After all, it's an European manufacturer. They just might have different design concept(s) than we have here in USA.

Hi Rodman99999,

With EDGE as amplification and Montana EPX as loadspeakers, I do hope the impact would be minimal as revealation is less critical to my personal taste.

Again, thank you both for your suggestions.

Happy Listening.

Otto
yu11375 OP
137 posts
 
Hi Guidocoroda,

Usually I do not post the manufacturer name that I have not positive experiences. After all, it is just my personal limited experience. It might work well in other settings and is fine with the taste of others.

Otto
More to discover