Power Cords and Power Conditioner, How to arrange?

I recommend putting the best power cord on the conditioner.
Trial and error suggests this to me however each system and your location can vary the sound results.

I find the best power cord should go from power conditioner to source/amp/pre etc. That's what works for these ears, with Audio Magic power conditioning....

I have found that from the wall to your conditioner is what carries the most sonic signature.

I agree with Warrenh. That is what works for me. Theoretically, let's assume your conditioner is effective. Most power cords degrade power as it passes thru them. Using your best cord after the conditioner should hopefully retain the benefits from the conditioner & may even enhance them, as my MIT cords do for me. Experiment though.

Based on years of trials and feedback, we learned that if you are plugging multiple(3 or more) components into a Hydra, the power cord going to the wall is the most important, and by a wide margin.

The fewer components you have on a single line (Hydra), the more things even out in terms of the importance of power cords to sources/amps versus the power cord to the wall. There are _no_ cases in my experience, where you should apply better power cords to components than you do from the wall to the Hydra. The power cord from the wall to the Hydra should -always- be at least the same quality as power cords attaching individual electronics to the Hydra. In my experience, this is true of other power distribution products as well.

Regards,

Grant
Shunyata Research