2. analog
  3. 1312058368

Graham Phantom Supreme?

Has anyone done a comparison between the Supreme and the mkII? Is it worth changing and expending the extra outlay?

The main revisions appear to be the bearing housing and an improved magneglide stabiliser (I think the internal wiring was up to a good standard already on the mkII)

There is a company called AudioMax Ltd (approved contractor?) which can perform upgrades from both Phantom I and Phantom II to the Supreme build.
Any experience of this conversion out there ?
Many thanks... :)
moonglum
dertonarm
1,042 posts
 
Rockitman, I usually always would go for lowest tracking error - i.e. 12" effective length or more - even at the sacrifice of increased effective mass.
But with the Graham Phantom this is a different issue and the 9" is the "best" arm wand out of the 3 length available.
Syntax may have the honor to reveal why.
syntax's avatar
syntax
2,193 posts
 
I think, Musical Surroundings has (or the person behind it) a problem to listen and to understand something right. Nothing unusual in that business btw. And Graham never said or wrote anything like that, because this isn't his opinion.
rockitman's avatar
rockitman
417 posts
 
10-28-11: Syntax
I think, Musical Surroundings has (or the person behind it) a problem to listen and to understand something right. Nothing unusual in that business btw. And Graham never said or wrote anything like that, because this isn't his opinion.

You very well could be right. They chose the 10" to show off the Clearaudio Master Innovation, which I have on order. The best part of the Graham...I can buy all three lengths of the arm and decide for myself. What length are you using ? I'm using the 10" right now on my Clearaudio Innovation Compact. Fantastic arm.
wrm57
975 posts
 
Rockitman, are you using the outer ring on the Clearaudio table? If so, that might be one reason MusicalSurroundings recommended the 10-in. The 9-in. brings the anti-skate mechanism uncomfortably close to the ring. I have one on the full Innovation Wood and I just *barely* have clearance with my 9-in. Phantom II.
rockitman's avatar
rockitman
417 posts
 
Good Point Wrm57. The arm lift rest is quite close to the ring with my 10". I can't imagine life w/o the ring though. Nothing like flat record playback, not to mention the other bennies. I need to take closer look at the anti-skate clearence.
More to discover