2. analog
  3. 1301535109

dynavector XX2MK2 set up question

on vpi classic, do you set up with or without the mat on the table,
on without mat said 2.2g with the mat on it measure over 2.2 i think about 2.4g
and bass is too heavy, with the mat i set it 2.1g , bass is just nice , just right weight, play on 120 to 180g so far so good. any suggestion.
My phono on 40ohms. have not try moving higher yet.
csng1
tricon_dave
95 posts
 
If you play records with the mat on the TT, then that is how I would set the tracking force.

I have a different table but have found that I prefer my Dynavector XX-2 Mk2 on the heavier side of the suggested range and have it set at 2.2 gm.
tom_hankins
928 posts
 
I agree with dave, set up the cartridge with the mat if you use the mat.
I had the best sound with my XX2 MKII with it loaded at 100ohms and set at 2.0.
csng1 OP
89 posts
 
thanks Tricon and Tom
i have set it on mat as play LP on it at 2.1gm, so far sounded good. just right weight on the bass, still on 40ohms, is quite pain in the ass to change to higher on the aesthetix io sgn. as i don't see very well , especially i have quite tight spot.
More to discover