2. analog
  3. 1285211688

Forsell Air Reference Mk 2 Worth buying?

I have the opportunity to buy an older Forsell Air Ref. Mk 2. It has been modified with an Well Tempered Reference Motor and has no flywheel. After reading as much as possible on the net about this turntable, I have found that it is an outstanding performer and a royal pain in the derriere.

Would like some guidance from those familiar with the turntable before I take the plunge! Bob
128x128baranyi
kosandr
6 posts
 
It is absolutely outstanding perfomer. I've got the Air Reference Limited Edition turntable about four years and consider it best piece of my system. Though I did replace the motor and done some adjustments on air piping. With right components - cartridge, wires, platform and stand it will give you the best possible sound quality. Good luck!
baranyi's avatar
baranyi OP
717 posts
 
Thank you for responding Kosandr. I would like to know what adjustments did you make on the air piping. I understand that this is crucial to making the turntable work correctly. Which cartridge do you use with the Forsell? Bob
microstrip
180 posts
 
Kosandr,
Do you have a manual for the Forsell?
kosandr
6 posts
 
Microstrip, yes I can email it to you. Let me know where.
kosandr
6 posts
 
Hi Bob, I used to have Dynavector VX-1S, but now I'm with Ortofon A90. Re piping: it came with adj valve for the platter only. I modified piping so the valve now can adjust the tonearm air. Its more important to minimize the air flow for arm. Also it came with little noisy motor... I did replace the motor and now it completely cilent. For the table support I am using the FIM large spikes settled on acrylic platform on top of the small custom made rack. Cheers, Andrew
More to discover