Removing fine scratch marks from VPI plinth

i haven't used it before, but novus is made specifically for repairing fine scratches in plastic/acrylic.

http://www.novuspolish.com

I use the Novus products and have had wonderful results not only on the plinths, but dustcovers also. Highly recommended.

I had some unknown sticky substance on my Aries and ask them: here is what they had to say:

You can use turpentine on the chassis and the platter but you will need to clean it afterwards with windex or some other glass cleaner. Should come right off.
Panel magic makes the acrylic on the table look like new if you use it a few times a year, especially on the platter. Just wipe it all off with a soft cloth after application and allow to dry overnight.

Mike

I used lighter fluid on my mystery substance, took it off with no marks.

Novus Polishes are what most Plastics Companies suggest to use. One can also use 3M Hand Glazes and get very good results as well.

The key with any product you use, will be always to use the least agressive product. It is better to use something like Novus #2, and use it a few times gently, rather than using a more agressive product like Novus #3, and trying to remove deep scratches all in one application. Try to resist the urge to rub hard in any one particular area, it will cause hazing-light scratching, which will be later hard to remove. Fan out from any damaged areas-scratches to blend the application.

Novus #1 is generally good for just upkeep, and placing a nice shine on the surface, removing fingerprints, etc. It contains very little, if any abrasives. Mark

You're all forgetting the cloth used can cause as much damage as you're trying to remove. Quality microfiber is the best, followed by 100% cotton. Probably better to use the cotton with the plastic polish, as it is more agressive and then remove it with microfiber. Whatever you do, avoid paper towels and polyester/cotton blends.