2. analog
  3. 1235412054

Denon DL 160/DV 10x5, PrimaLuna PL2 Factory Stage

Hi, need some advice recommendations from cartridge gurus out there. I have a new toy, a PrimaLuna PL2 w/the factory phonostage and a Rega RB250 arm:

Specifications
Freq. Response: 10Hz-50kHz
Distortion & Noise: -83dB
Input Impedance: 50k Ohms
Gain: 42dB
Suggested Minimum Cartridge Output: 2.0 mV
RIAA Accuracy: <0.5dB @ 20Hz-20kHz
Dimensions: 1.26" x 1.5"

Thinking of pairing this up with a Denon DL 160:

# Output: 1.6mV
# Stylus: .1 x .2mm special elliptical diamond
# Cantilever: aluminum
# Frequency range: 20-50,000Hz
# Compliance: 14x10-6cm/dyne
# Tracking force: 1.3-1.9g
# Weight: 4.8g

Is this a good choice? I'm worried that the 1.6mV is too low. Although I read somewhere it's actually near 2.2 mV. I like the fact (from what I read) how it's forgiving, detailed yet smooth.... and more importantly inexpensive.

Would the Dynavector 10X5 be a better choice?

Any other recommendations in this price range? Trying to keep costs down/simple system.

Do I need shims for the VTA? Can I just use washers? What kind?

Thanks in advance.
elf73
stanwal's avatar
stanwal
3,147 posts
 
I am a dealer for Dynavector but don't have a 10x5, have used earlier generations. I do use a Denon 160, which is quite good. I paid about $100 on the internet for the Denon new so it represents much less of an expendature. I would buy one, very likely you will be happy with it. Take the savings and buy a VTA adjustment accessory from VPI , disclaimer, I am a VPI dealer,or Michell [ditto] or other company. The Michell is cheaper , I don't think it allows adjustment while playing , I think the VPI does but I have only a price on it , no lit.
Ag insider logo xs@2x
rauliruegas
12,809 posts
 
Dear Elf73: IMHO I think that you can do better through MM cartridges like the Shure M97X, Sumiko Pearl or the Shelter.
From my point of view and everything the same a MM cartridge ( loaded at 100K ) performs a little better than a HOMC: the MM one is in its " natural " stage/home.

Regards and enjoy the music.
Raul.
johnnyb53
3,510 posts
 
For me the logical move up from a Denon DL-160 was the Audio Technica AT150MLX. It's $250-260 from J&R Music World and LPGear respectively. Replacement stylus is as cheap as a DL160--$180 from LPGear. Its weight and compliance also work in the same range of arms as the DL-160's.

It has a tonal balance similar to the DL-160, but gives you more of everything--more detail, more body, more extension at both ends, 'way better tracking, a more sophisticated stylus shape, plus 6-nines single crystal copper wiring. And more output besides. It puts out something north of 4 mV which is going to match well with your PrimaLuna.

I've had mine 8 months and it just never occurs to me to upgrade my cart anymore (famous last words). The DL-160 sounds like a very good entry-level cartridge. The AT150MLX sounds like it's getting you into high end territory.
More to discover