Platter Upgrade for Garrard 301

i just recieved Steve Dobbins plinth design to try on my 301. i cannot yet say how it sounds but i am told by Steve and one of his 301 customers that it is the way to go and lowers the noise 4db or so. i'm waiting for a couple of cartridges to show up so i can do some A/B comparisons on the plinth (one of the cartridges is identical to my vdH Colibri on my Rockport).

i would recommend contacting Steve [email protected] for details on the plinth.

Hi Mike. I've read your review and look forward to hearing about your new plinth. I'm also very happy to hear from you, Jonathan. I think its great the you are working directly with Loricraft/Garrard. In fact, I already had a plinth, such as yours, in mind, as well as a Loricraft power supply. What type of modifications do you do to it? However, after doing these, would a platter upgrade make sense? It seems to me that most turntable manufacturers (e.g. VPI Super Platter, Teres/Galibrier) and many commentators (e.g., Arthur Salvadore) emphasize the importance of the platter and bearing. Are these components less relevant on a Garrard?

ooops! i just realized i wrote 'plinth' in my post.....i meant 'platter'...Steve has sent me his new 'platter' design to try.

sorry. they say your mind is the second thing to go.....

The 301 has a fine platter and bearing, provided it is in top condition. If it is not, then the bearing needs to be replaced. The platter was well designed for the table, and would be the last thing I would recommend looking at, placing attention on a proper plinth (the 301 was not sold with a plinth anyway) and a power supply and motor controller (OMA will have an exclusive Garrard Loricraft model out shortly, which addresses issues beyond the scope of this thread.)

At a certain point, with this kind of topic, you invariably encounter the "Baby and the Bath Water Syndrome." Meaning, at what point do you stop replacing the components of your turntable with upmarket replacements, at which point you no longer have a Garrard 301 at all, as everything has been replaced but the badge. I can see why you would want to do that with a Lenco, for example (OMA makes a plinth system with Peter Reinder's steel plate for the Lenco, which gets rid of most of the turntable you started with) but the 301 is a great sounding classic which just needs servicing, and a great plinth to sound wonderfully. A power supply adds further refinement, but if you find yourself curious about the sound of a different platter after you get your 301 up and running, why not ask Steve Dobbins if he can let you try one of his new platters? He's a great guy and I'm sure he would oblige.

Jonathan Weiss
Oswaldsmillaudio.com

Ok. Thank you very much.