2. analog
  3. 1230087486

VTF on a Dynavector 10x5

I just had a Dynavector 10x5 installed on my VPI Scout by a dealer. When I got home I just checked the VTF on my Shure guage and I'm coming up with a reading of 2.5 grams. Dynavector says it should be between 1.8 and 2.2 grams.

Should I worry about the tracking force or just leave it alone?

So far, it sounds great. Though the cantilever does appear slightly not perfectly straight, I haven't heard any distortion, so I assume the dealer allowed for this when he set it up.
sinisterporpoise68
kurt_tank
1,189 posts
 
I suggest you change it to comply with the Manufacturer's recommendation. If it sounds the same or better, great. If it sounds worse, change it back.

IMHO, the less VTF the better, (as long as you have the sonics at their peak performance of course).

Good Luck!
audiofeil
4,011 posts
 
In most tonearms that cartridge performs best between 2.1g and 2.2g IMO.

I wouldn't recommend going over as coil damage may result; besides, properly aligned there is no reason to exceed 2.2g.

Don't forget, most vinyl damage is the result of insufficient, not excessive, VTF.

Dealer disclaimer.
sinisterporpoise68 OP
63 posts
 
Thank you both. I just set it to 2.1 grams. No idea why this guy would have set it so high.
More to discover