Looking for turntable for under $1000


I've been looking at turntables but don't want to spend over $1000. I like the Pro-ject line because they have RCA jacks at the base of the tonearm which allows the user to choose any interconnect he wants. Also like the fact that, unlike the Rega, the the VTA can be easily adjusted. I've narrowed it down to the Xpression ($500), RM-6 SB ($900) and the Xperience ($1000). Would be interested in all your thoughts. Thanks everyone. Bob
bobgates
Mingles - I really like the Pro-ject RM-5; it sounds superb and is very easy to set up in terms of the overhang, VTA and tracking force. The only negative thing I see about the table is that, after setting the anti-skate, there is a slight tendency for the arm to want to drift toward the outer edge of the record as it is being lowered. This may be due to the fact that I am using a very lightweight cartridge (the Ortofon X5 only weighs 4.1 grams). Have the tracking force set at 2.1 grams. The table comes with both a felt and cork mat. I have been listening to the cork mat recently which seems to provide a more neutral sound with better dynamics. For $650 this table is hard to beat.
Post removed 
Bob, I'm glad you like the table. I think the drift is due to the fact that the Ortofon X5 is too light for the tonearm. 4.1 grams is at the lower limit for the counterweight. The 9c is not a low mass arm. You can see from Pro-ject's web site that the optimal cartridge weight is between 6-10g:

Effective tonearm mass 9,5g
Supplied counterweight cartridge weight 6 - 10g
Optional counterweights cartridge weight 10 - 15g and 4 - 6g

You'll get better sound (in particular, better bass) from a properly matched cartridge. The effective mass of an arm and cartridge plays a key role in how the needle tracks the groove.

However, if you plan to keep the Ortofon and the drift continues to be a problem, you might think about putting a small amount of light tacky glue (like reusable glue) on the lift bar that lowers the arm. I know this doesn't sound elegant, but it works.
Tvad - I had the MMF-7 a few years ago and yes the Pro-ject tonearm is very similar with the weight and nylon thread for anti-skate; it also has the choice of three places on the arm to attach the thread; I have it on the lowest setting or the notch that is closest to the pivot point.

Mingles - what cartidge would you recommend for the Pro-ject RM-5 tonearm? I like to stay under at a $400 or less budget when it comes to cartridges.
Just got a used MMF-7 that has a Grado Gold cart, $710 plus shipping. I'm not lusting for the scout That I heard at my local dealer.

Lucius