Synergy - SO Important

I once saw a documentary about water fountains. the science to make water behave in a desired fashion was amazing. I’m sure that braiding, twisting and flattening of cable will have a conductive difference. I guess they don’t teach that in electrical engineering school.

Just to clarify:

Slight changes in resistance in cabling (a fraction of an ohm) may have a very subtle impact on the system, particularly crossover networks (RC filters, where changing the R will slightly adjust the resonant frequency), but the impact should be negligible.  Better to address these things starting from a baseline of the lowest resistance possible (usually 12-gauge wire should do the trick).  Inductance (L) from wiring is not likely to be a factor way down at audio frequencies.

It is a true statement that a thinner conductor of one material can outperform a thicker conductor of another.  Here are the numbers for resistance of 10 feet of common materials used in wiring, for two common speaker gauges - notice 14-gauge silver (thinner) beats 12-gauge aluminum:

14 AWG
Aluminum - 0.0416388 Ω
Copper -   0.0254507 Ω
Silver -   0.0234665 Ω

12 AWG
Aluminum - 0.0261869 Ω
Copper -   0.0160061 Ω
Silver -   0.0147582 Ω

So yes, wiring/cabling can have a minor impact, but you do not need to spend an arm and a leg on it.  Just understand the underlying principles. Has nothing to do with branding and everything with material science.

Save your money for better components, and happy listening!

So happy we have someone to help us save money guys.  I'll go grab my coat hangars and replace my cabling immediately bc a conductor is a conductor right?  Give me a break