Accuphase DP-700

Thank you @imhififan 

I powered it on normally using a step down transformer and verified the voltages to be what you described in your picture. 

I swapped the yellow and brown leads on both upper and lower taps. So far it seems to be playing fine. What should be the voltages after swapping the leads?

Taps 2 and 4 are connected to the mains input; therefore, by connecting both the upper and lower yellow leads from Tap 3 to Tap 4, the transformer can be configured for 120V. 

@imhififan thank you for helping

@pharssa  I am happy to be of assistance.