This has baffled me as well, BNC is such a superior connection. I don’t use SPDIF in my system anymore, but I always had either BNC or AES as a requirement when I did.
Why aren’t BNC jacks common?
Digital connection between a source component and DAC calls for typically other a 75 ohm impedance or 110 ohm impedance cable. Sourcing a 110 ohm cable is easy- it’s very common. But a 75 ohm cable? Not so much primarily because just about every RCA terminated cable is not a 75 ohm cable, however, true 75 ohm cable is a snap with BNC terminations. BNC is not expensive and arguably it’s a more secure connection than is RCA. I therefore do not understand why components with BNC jacks are very rare. Perhaps you can argue the ommission of a BNC connection is justified on mass market gear but on high end gear? Can someone provide an explanation that makes at least some sense? My DAC supports BNC (Bricasti) but my CD transport (Simaudio) does not. Thanks!!
- ...
- 21 posts total
@zlone in my system I run two digital components into my DAC, one is a streaming transport and the other is a CD transport. Both have AES outputs and RCA based SPDIF outputs plus toslink. The streamer also has a usb output. My DAC has an aes input, rca/SPDIF input, BNC/SPDIF input, usb input and toslink. I am not a huge fan of usb or toslink, so I am left with SPDIF and aes. My streamer feeds the dac via aes and cd feeds the dac with a cable that is rca on one end and BNC on the other end. |
That is unfortunate that you have to use an adapter. I never liked USB that much, but I eventually came around to it as my equipment and cabling progressed. I see that you have a Bricasti DAC. I recently acquired an M3 with the network card and have switched to using that input as a Roon endpoint, it far exceeds the performance of the other inputs on the DAC. |
I love BNC. Recently got rid of my streaming transport which was an Auralic Aries G2.2, since Auralic went out of business I figured it was time to move on. The inclusion of BNC was a factor I looked for when checking out new devices. Not a deal breaker if it wasn't there, but I noticed that the finalists I was considering (Aurender N20, Lumin U2X, Aqua LinQ) all had BNC. Ended up getting an Aqua LinQ and am using BNC to my Lampizator DAC. AES also sounds great, I can't decide between the two. Whichever I stick with, I'll use the other option to add a CD transport in the near future. |
- 21 posts total