SL-1200GME Turntable

OP,

this high compliance cartridge is not for your medium compliance arm, I am posting it for

OTHERS

who may have an SME or other compatible arm.

Does anyone have experience with this seller _____?

https://www.ebay.com/itm/117128451188?mkrid=711-53200-19255-0&campid=5338381866&toolid=10001&customid=ef638828-31c3-11f1-90bb-613830653334

IF like me, you have a V15VxMR body, and want an original stylus with microwall beryllium cantilever, this is the same seller

https://www.ebay.com/itm/117128451179?mkrid=711-53200-19255-0&campid=5338381866&toolid=10001&customid=dbca8856-31c4-11f1-94a3-306534313337

AI Quickie

"The Shure V15VxMR is a discontinued moving magnet phono cartridge introduced in 1996 and sold until 2005, renowned for its exceptional trackability and ability to extract groove information at a low 1 gram tracking force. 

Key features and specifications include:

• Cantilever: Utilizes an ultra-low mass Beryllium MICROWALL/Be™ tube with the highest stiffness-to-mass ratio ever, raising the mechanical resonance to 33 kHz. 

• Stylus: Features a MASAR™-polished Micro-Ridge diamond tip (0.00015 x 0.003 in.) designed to minimize distortion and record wear while improving high-frequency response. 

• Performance: Delivers a frequency response of 10 to 25,000 Hz with 3 mV output voltage, offering superior signal-to-noise levels and channel separation. 

• Protection: Includes Shure’s Dynamic Stabilizer/Destaticizer to handle record warp and static electricity, alongside an exclusive SIDE-GUARD system to protect the stylus from side impacts. 

The cartridge was highly acclaimed, earning an Editor’s Choice Best Buy award from The Absolute Sound in 2003, and was notably used as a reference cartridge for Sony Music’s archival operations.  While newer models offer higher frequency extensions, the V15VxMR remains a sought-after vintage unit for its warm, detailed sound and robust tracking capabilities, with replacement stylus available as the Shure VN5xMR."

/////////////////////////////

btw, JICO makes an SAS replacement stylus, I have one, sounds terrific.

https://www.jico-stylus.com/product/vn5xmr-hg-sas-b/

Do you have many MONO LPs?

Are you collecting Jazz? So many great musicians started before stereo lps in 1958, and recording techniques were quite good.

I learned here, a basic MONO Cartridge like this one, will sound better than a Stereo one playing in Mono Mode.

https://gradolabs.com/products/grado-prestige-mono-phono-cartridge-model-me

Thank you everyone for taking the time to reply. So far I've got the setup all ready to go but still waiting on a pair of new RCA cables to arrive and connect the phono to my preamp. 

I'll probably still be running hot considering the cart is a high output.... I recall with my earlier preamp VK-3ix that I could barely turn the volume knob before it was too loud. My hopes now are that the VK-33se currently in my system can deal better or at least allow lower sound. Its hopefully just part of programming it 

Elliot I'm not sure the TP2.5 that I have will give different cart load settings. VTL did released a TP2.5i version that might have that though.... Mine is the version before they even introduced a rumble switch.

OP

I found this about the TP 2.5, but it shows a Rumble switch, so yours might be different, however, you might have some internal settings you can adjust.

Perhaps look at this manual pages 8-12 (manualslib site pages 13-17), you can see and read them online or take screenshots and crop them if you do not want to download something from a site you are unfamiliar with.  

https://www.manualslib.com/manual/1278796/Vtl-Tp2-5.html?page=13#manual

I have the MP700 and had Hana ML. Tried both on my Purefidelity Harmony MK2 turntable with Origin Live Enterprise mk4 tone arm. My phono is Grimm PW1. The MP700 is a clear set up (no pun intended). Improvement in clarity and detail. Also it does a better job at pulling music into a space. Getting Etsuro Urishi Gin-Nezu this weekend. Interesting to see how much better it will be.