1. Home
  2. digital
  3. 197818-202224

JPlay experts? — Innuos Stream1 is invisible!

I just started exploring JPlay, and it seems quite good sound-wise and in terms of user interface, but although it easily found all of my other streaming devices (Aurender, Gato, BlueSound) on my LAN, it will not recognize my Innuos Stream1 as an audio output. (It does recognize it as a potential library, but as i have no SSD installed on the Stream1, that is not terribly useful or relevant.)  

I have enabled UPnP on the Stream1 via the Sense app and have tried putting the Stream1 in Innuos Standalone, Innuos Endpoint and HQ Player modes, but in none of those will JPlay list the Stream1 as an audio output choice.

Anybody have any idea of what I’m doing wrong?

( @marcin_gps I did send a similar question to the JPlay support email the other day.) 

kirkwallace
kirkwallace's avatar
kirkwallace OP
319 posts
 

@milpai thank you for all that leg work!  I’m surprised at that answer, but that may be exactly the problem. 
 

@buellrider97 Good question. You know, I didn’t think to ask Innuos.  I’ll give Marcin a day or two to respond, Because for sure, he will know if what ChatGPT is telling Milpai Is the case or whether there is a fix.   But if he’s busy or otherwise, can’t respond here, I will take your suggestion and ask Innuos. 

milpai's avatar
milpai
2,669 posts
 

@kirkwallace ,

I did not do any groundwork, except copy-paste twice.

I copied your post except the last line. Also changed the second-last line from:

Anybody have any idea of what I’m doing wrong?

To

Any idea of what I’m doing wrong?

Once Chatgpt spat the response, I copy-pasted back 😀

kirkwallace's avatar
kirkwallace OP
319 posts
 

Still very kind of you @milpai .

audphile1's avatar
audphile1
7,966 posts
 

AI suggests the following 

Steps to Integrate Innuos with JPLAY

  1. Access Innuos Settings: Open a web browser, go to my.innuos.com, and select your Innuos device to access the Sense interface.
  2. Enable UPnP Server: Navigate to System > Settings > UPnP.
  3. Activate Integration: Toggle the UPnP integrationswitch to ON.
  4. Configure Streamer: Under the "Network Streamers" section, select SCAN to detect available renderers. Select the device you want to stream to (it will turn gold) and click SAVE.
  5. Configure for JPLAY (Optional but recommended):For better compatibility, set the streamer to "Compatibility Mode" within the Innuos UPnP settings.
  6. Use JPLAY: Open the JPLAY app on your iOS device. The Innuos server should now appear as a library source. 
audphile1's avatar
audphile1
7,966 posts
 

I would also recommend rebooting innuos to terminate whatever tasks it may be running 

More to discover