What improvements would I get with a "better" preamp?


Current preamp is Mapletree Audio 2A/SE Linestage, upgraded with Black Gate caps. Tube rectified separate power supply. 6SN7 per channel. Point-to-point wired. What could be better (for less than $5,000) and why? Must have RCA ins/outs, not XLR.

rockadanny

Thanks! I'll seek out some better tubes, tho my main source,  Brent Jesse, is closing (has closed?), from what I've read somewhere. 

I can run 12SN7 with the flip of the switch. Any 12SN7 as good or better?

@rockadanny I don't know the 12SN7's as I can't use them but they are often cheaper since not many can use them. Ask Brent. He'll know what to do and will have something that matches well with your gear. 

Brent’s retired. :-(  12SN7s are fun, a bit "lighter" weight in sound due the lower cathode current.  My go-to 6/12SN7 is the GE GTA or GTB.  They are plentiful, affordable, can easily be found NIB.  If you haven’t tried them you should.  They have a full, textured, smooth sound.  I use them in my amps and preamp. ;-)  Another good 12SN7 is the Sylvania "Bad Boy" with tall, rectangular plates--facing each other, not angled.  (I don’t care for those at all.)  And if you *really* want to try something different and interesting, get some adapters from eBay and use 2 6/12J5’s in place of each 6/12SN7.  It’s a nice sound!

"@billpete ...Without good tubes, a very solid piece of gear can sound pretty dismal. I think you would agree with that and is pretty much the point that I’m trying to make to the OP." 

Sure, Yes, Agree. 

And, fwiw, what I figured out over time with my former Cary SLI-80 amp, current Cary SLP-98 Linestage, and former Cary V12R amp is this: 

  • The tubes make a difference, yes.  What made an even greater difference was changing the caps, adding better diodes/resistor parts, (standard upgrades) inside, and THEN all the sudden any tube swap/changes and comparisons made an even greater and more noticeable difference.  
  • When my buddy removed his older Jensen oilers and replaced them on the SLP-98 (older version) with the new Mundorf  silver-gold-EVO caps. He called me up kinda stunned at the resolution change. 
    Get this, then he ordered an all-new 2nd version SLP-98 with all the upgrades in it, and sold the older 98 to his buddy to have.     
  • Some refer back to the decades old story of the "bad batch of Jensen oilers" with those caps, and all I can share is the newer/better Mundorfs worked differently, much more clear and transparent with higher resolution, if that’s what you prefer.  Worth checking the caps too and trying the swap if anyone has the old thick sound still etc.