I guess someone should just get a faraday sleeve for their cable run and see how much noise make it down the cable.
Network cable rabbit hole
Hello,
I have fallen into a network cable rabbit hole…. Let me explain.
I have found that Ethernet network cables make a big difference in my system.
Curious, I considered the range of options between my Nagra Streamer and my WIFI Router 12’ away.
I was curious about fiber, I got a cheap pair of T-link Ethernet to fiber converters and a fiber cable, it was interesting. Super clean, but super dry and a little shrill. Took it out right away… it took too much life away form the music… .
Next I tried a regenerator. I tried one that was rated super well, about 1200$… and i spend the night auditioning this vs my $15 amazon network cable… and I could not tell the difference! I think the filtering and reclocking in my Nagra Streamer does the trick on its own perhaps? Regardless why, I couldn’t barely tell a difference between the with the regenerator and without.
During this, the swap between a standard Ethernet and a $300 bronze dragon network cable was apparent. Again, pointing in the direction for my system that the Ethernet cable is a worthwhile upgrade.
So… What do you all think of all this?
Do you have a recommendation for a 12’ Network cable in the 1K range that is super open, wide stoundstage, but with fabulous tone and texture?
Thanks,
r.
- ...
- 44 posts total
@mggartner etherregen is technically and logically an unmanaged switch. It uses however an internal flip-flop for isolation and reclocking. So in this regard it is unique but in no way I would call it a repeater. you said that your split cable (with a very expensive one ) and a switch you reduce Jitter. As a basic switch does not rely on its internal clock for any jitter relevant operations, I assumed, maybe wrongly, that you think a cable has such an effect. my bad! |
@yags1 lol Or daisy chain EtherREGEN units to keep reclocking the signal but be sure to use a stiff 🐈 8 in every link. Is the 🐈 stiff because you terminated it with an rj45 connector? Poor animal… |
@total111 chillax. Understand the context of the OP’s posts. And the approach I proposed that you completely misunderstood. No one is swearing to defend their bias. I have no bias. I have no idea what sounds best to you in your system. I know what sounds best to me in mine. That’s all. No bias. No BS. I asked if the OP was willing to experiment with what I proposed. Again I didn’t sell this idea as the bible. Cool? |
- 44 posts total