1. Home
  2. amps-preamps
  3. 196394-82901

AirTight ATM-300 - new Coupling Caps

So I want to replace the coupling caps in my Airtight 300B amp. The original ones are $5 Sprague orange drops. 0,1uF interstage caps between input tube (12AU7) and driver tube (12BH7A) and 0,47uF between driver tube and 300B.

I love the amplifier, it is very resolving and airy with great soundstage separation. However I miss some body and fullness, and tighter bass, hope new coupling caps can help with this. I like a natural sound with lots of body and texture, good detail and a tight and deep low end.

I have read alot of forum posts and narrowed my choices down to these 3;

Duelund CAST cu sn tinned copper

Jupiter copper foil paper and wax

V-cap ODAM

I have read that some capacitors are best used in lower voltage applications and others are better in higher voltage applications, so I am open to using different brands in interstage/300B coupling. 

Please share your experiences, impressions and recommendations. Not necessarily with the Airtight, but preferably used as a coupling cap.

rubjel
rauliruegas
13,323 posts
 

Dear @salectric  : The tone issue resides in tube technology. Sprague is a good one cap but as several other gentlemans you like more the added colorations/distortions that does the boutique caps or boutique resistors as the Duelund ones.

I owned an all tube electronic system for around 10 years till I learned and I swith to SS and even we  designed/builded a Phonolinepreamp and modified my Levinson monoblocks.

 

As I said in film caps Wima is the standard in the industry:

 

Audiogon Discussion Forum

 

 If you builded your amps then you understand that caps true caps can't show colorations by it self but those colorations comes from th electronics: that's it.

 

R.

rauliruegas
13,323 posts
 

Dear @rubjel ​@salectric   :  This Dartzeel is over 40K electronics and those red caps came from Wima but if you take Dan'gostino 270K monobloks is full of Wima caps not " boutique " caps.

 

Munich Preview Exclusive: Gryphon Diablo 120 Amplifier and Mojo S Loudspeaker system - hi-fi+  again those red caps are Wima caps.

 

CH Precision M1 and A1.5 - The Audio Beat - www.TheAudioBeat.com

 

The small ones are Wima.

 

So all those first class designers in cluding the Swiss made CH are foolish or ignorant?

 

Audiogon Discussion Forum

 

Audiogon Discussion Forum

 

Well, I think is enough.

 

R.

salectric
783 posts
 

@rauliruegas You are entitled to your own opinion.

By the way, the Wima caps in the solid state gear you referred to are not signal coupling caps.

rubjel OP
16 posts
 

@salectric great post, thank you :)

My memory may have mixed it up with another cap wrt thin sound.

Reliability is definitely of high importance, the V-cap Cutf is on my list!

Would the CuTF fare well in both interstage and coupling? I read that some caps are best for Xovers and not so good sounding in electronics. And some even in interstage vs coupling and vice versa.

Can you please share your thoughts about the CuTF vs Duelund CAST tinned copper? Bass firmness is of high importance to me, since tube amps tend to be a bit wooly in the bass, don't want to accentuate this with the wrong coupling cap.

Tone density is also important to me. I would't necessarily say the AirTight is thin sounding, but I feel it has more focus on detail and transparency than tonal density and fullness/weight. Maybe the Jupiter copper would improve this aspect?

rubjel OP
16 posts
 

@gareents very interesting, thanks for sharing!

May I ask why you chose Multicap? This brand has gone under my radar, never heard of it before.

Did the sound become fuller, did tone density improve?

When you say it got more neutral, in what way do you think it deviated from neutral in it's original form?

More to discover