Durable record vacuum cleaner recommendation?

Thanks everybody. VPI gets a solid recommendation. I see one problem: when I take record out of ultrasonic, it is wet on both sides. The VPI has a platter that supports the entire record (12") not just the label. So the platter will get wet every time I put a new record on.

Or is it possible to get a label-size platter? @joenies How do you deal with that as you also do Ultrasonic followed by vacuum?

Re noise, yes, it is a vacuum cleaner. Well understood. What I am experiencing with the PJ is well beyond a vacuum cleaner.

The Loricraft is a bit over the top, IMHO. The point suction arm is of no concern to me after ultrasonic cleaning. And price is also a bit steep.

Below is a photo of one of the cleaning stations at the Packard Campus in Culpeper, which is the intake facility for the Library of Congress. The photo was taken in late 2014. (The facility is not open to the public)

I have been using a big Monks Omni for the past decade, which is supplemented by the older version of the KL. I had a VPI that started life as a 16 and was converted to a 16.5 It would not die. I gave it to a friend at the beginning of 2017, along with an assortment of brushes, applicators and fluids. 

I will do a write up on my new setup, which includes both an MW-1 Cyclone and a HumminGuru after eye surgery tomorrow (assuming all goes well).  I have figured out how to take the record from the ultrasonic machine back to the vacuum machine for final drying and the full platter on the VPI is not a hindrance with my method.  Too blind for a detailed write up tonight.

Good luck with the surgery @billstevenson. I've had a few of them. The very idea is  almost worse than the actual procedure. 

I flip mats on the Monks if I want to wash/rinse on it, pop it into the ultrasonic and dry with the Monks, just to get that last iota. 

@oberoniaomnia I will let the US RCM wipe and blow album partially dry. If still wet I’ll put it in a drying box. Then onto the VPI for a rinse, brushing and vacuum. 
If you put a damp/wet album on the VPI put a paper record sleeve on platter first. Pull record off, remove record sleeve, vacuum other side. Repeat as needed.

Joe