The $27,900 disappointment? Wilson Audio Watt Puppy 8 issues.

@hjdca  Wilson claims the Watt and Puppy should be measured together.  How is that going to change the response from 200 Hz up?  Strange claim.

If you have the right power amp for the Wilson’s they will perform. Last year Axpona Quintessense audio were using Dan Agostino gear. First time I realize how good the Wilson’s . 

I do believe two Mc275s in mono are enough to drive the W/P 8s. However, I do waffle between the 8 ohm tap and 4 ohm tap. These taps are halved when in mono mode, so, in mono mode they are supposed to be 4 ohm and 2 ohm. The 4 ohm tap produces more current and less voltage than the 8 ohm tap, and I believe you can hear and feel that in the bass. For excellent high res (SACD) recordings with good bass, the 8 ohm tap is hard to beat. For older, thin sounding CDs like Punk Rock, he 4 ohm tap sounds better fills the room much better and fixes thin sounding CDs. Also, on the 4 ohm tap, my furniture and bar vibrate more from the bass.

@hjdca Beautiful system! You know what sounds good - ignore the noise floor from YouTube hucksters. That's a different hobby than what you (and me) are doing. 

It is a very nice system, but if it were me I would pair the Wilsons with a really good S.S. (high $) amp to see what you get and what you give away. There is no way that a speaker that dips like the Wilsons can work ideally with tube amps. To me a glaring problem in a good speaker line.