2. tech-talk
  3. 187352-186583

Need help setting up new turntable

I am hoping to get some quick tech advice here. I just purchased a new to me Rega Planar P6 with an Aria MC cartridge. Got a killer deal btw. I am at a loss though as I have an Adcom GFP 555 and I am not sure if it is really going to be compatible with this MC cartridge. There are two switches on the back one will switch between Lo MC and MM/High MC. The other switch is the capacitance setting and the choices are 55 175 and 235. At first read through I thought I had it figured out but now I am totally confused. The specs on the Ania cartridge isn’t matching up. Is this GFP 555 even compatible? Or am I opening a can of worms and diving down a rabbit hole?

some advice and direction is greatly appreciated here. 

jmoboogie
Post removed 
vair68robert's avatar
vair68robert
593 posts
 

@jmoboogie 

I apologize for causing confusion , I looked into the Rega phono preamps and they have a high 400uV and low 200uV  setting ( for their MC cartridges )  

Use the Lo MC setting .  

goofyfoot
1,325 posts
 

I would try different settings to see what sounds best. I mean, you’re not going to blow anything up. Or at least you shouldn’t. 

goodlistening64
79 posts
 

@jmoboogie 

If you are using the Adcom phono input it likely does not have enough gain to bring out the best sound in the Ania cartridge. Gain should be at least 60 db for the Ania..preferably 66-69 db. 

Older preamps did not have that much gain in phono stages and newer cartridges, like the Ania, require higher db levels to sound their best.

More to discover