@ motown-l
The Technics 100c is the same as the Technics 1500c without the built in phono stage. And it is a few hundred dollars less!!
https://us.technics.com/products/direct-drive-turntable-sl-100c
help choosing a turn table
good evening,
I will be purchasing my first turn table.. it will be for a second system using a Lyngdorf TDA 1120 combined with a pair of monitor audio gold 100 speakers . Budget is preferably < 2k and ideally < $1,500.. music to be played is likely classic rock, 80 s music, maybe some alternative.. want detailed sound that is not fatiguing .. appreciate everyone’s input thanks
- ...
- 50 posts total
I would never recommend a used table for a newbie. You will have questions and you will need dealer support. I second the recommendation to buy from Gene Rubin. He is great to deal with and will get back to you within the hour with any questions. He is also very fair if you want to trade in your equipment to upgrade. |
Both you and your wife are ’newbies’ to vinyl. considering that many try and do not stick with vinyl, I recommend a more modest start. If you get hooked, then move up after you have learned more and researched more. keep or sell the ’starter’ TT. This is my recommended ’starter’ TT. Get it level, plug it in, play! I had one for years, then 'moved up', gave the AT120 to a friend. It comes with a cartridge body (VM95) that allows easy upgrading of the stylus tip. https://www.audio-technica.com/en-us/cartridges/line-series/at-vm95-series with several ’good, better, best’ interchangeable stylus options. Simply pull the existing stylus out, push the alternate stylus in. https://www.youtube.com/watch?v=gCva9sgRP3E It comes with an ’elliptical’ stylus shape. After a short time, IF you like it, then I recommend you change the stylus to this one: https://www.audio-technica.com/en-us/at-vm95ml the difference is: the stylus tip is Microlinear which will have more contact surface with the grooves, and last longer than other shapes. read about stylus shapes here to get the general idea (scroll down to the diagrams): https://www.sound-smith.com/articles/stylus-shape-information final point: cartridges have to be critically aligned. the factory does that to the AT120/VM95 combo before shipping. When changing only the stylus, the VM95 body does not need to be re-aligned, the new stylus simply pushes into the aligned cartridge body. Best of luck with Vinyl Nirvana! |
- 50 posts total