Mac mini to eq using toslink?

if the dac accepts toslink, then it will work fine. if the dac uses coax, i would recommend going out of the mini to a jitter device, then use coax into the dac. going straight into a dac from a mac or any other music server without a dac sounds terrible..

I don't understand question and the answer.

"Would i be able to use a mini toslink adapter and toslink cable and then go to the eq from the mac mini?"

What eq - you mentioned going to Beringer DAC.

"going straight into a dac from a mac or any other music server without a dac sounds terrible.."

Are you saying we need two DACs?

You are right. I messed up the question. I meant from mac mini to behringer eq then to a paradesea dac. Sorry for the confusion

Mac mini has only optical out and if your Beringer EQ has coax input use adaptor toslink/coax on the side of EQ (run Toslink all the way). Toslink is not very good for jitter (but good for braking ground loops) being slow but you don't have a choice with MAC-mini. If you make your own coax, like I did, be sure to use proper impedance cable and connectors. Typical RCA connector for S/PDIF, for instance, is not 75 Ohm and you'll get reflections on impedance boundaries but 75 ohm RCA connectors are available.

go out and purchase a jitter device (monarch, audio alchemy, genesis, etc..) and go from your mac into this jitter device using a toslink cable. then go from the jitter device into an external dac using a digital coax cable. this will give you optimal sound. don't try to make cables or convert 1 type of cable to another. also, skip the usb connection until somebody comes out with a dac that actually will work with a usb cable. the new audio research dac just might be the ticket for the folks loooking for a usb dac.