2. speakers
  3. 183991-181941

Feel like I'm outta my mind....

Been through this forum, and don’t know where to start. Y’all are a pretty wild bunch!

Looking to go to a 2.2 setup, but have no idea where to begin. Haven’t seen anyone review speakers wholly, or in their entirety so far.

Old guy; ears are about 85-90% from the grinders and diesels.....LOVE the feel of sound - hence 2.2. Current dealio is dual 10" drivers and a 1" silk dome in each tower (no-name, about 275WPC on 8 ohm), and a 100W 10" front-firing sub. Missing lots of vocals though...... Looking for a full, rich-sounding set, or set(s) of towers.

Power is available through twin Carver M400a’s at 500WPC, and twin Carver M400t’s. Would love to have dual, and responsive subs to cover the low bits - let the ’a’’s handle the mids, and the t’s can get up high. Pretty sure I have the power to bi-amp on 20A breakers.....(electrician - (NOT electronics-guy!), amongst better things.) Source is usually CD, from the few thousands lying about here...

KEF Q950?? Polk R700?? Monitor 300?? SVS Pinnacle? Paradigm Premier? Monitor?

Any generalities that can start pointing me in a decent direction? Budget is simply....."let’s not get stupid...."

Metal is priority. Rock second, opera third, classical fourth. Just lookin’ for thoughts. Anything to start some ideas......
 

the_general
fertguy's avatar
fertguy
269 posts
 

I bought a set of Focal speakers powered by a Carver TFM 45 with upgrades. I thought it sounded great until I acquired a pair of PS Audio M1200 mono-blocks.

The difference was way better than I expected. The Carvers are very powerful but no match for newer amps in sound quality.

mrskeptic
262 posts
 

GoldenEar Triton One.R or Two+ will get you there without the need for a sub. Pretty reasonably priced too.

the_general OP
3 posts
 

Hmmmmm! Lots to think about! Appreciate the thoughts....it could very well be that I just really like the look of it on the shelf...


I've ordered the recommended book; looking forward to learning more....Will be heading out for some listening with at least one of the amps in the next couple days. Local stores have some Paradigms and Focal's; might try a Klipsch or two, but I'm not a huge fan of the bookshelves in my shop...

Love hearing the recommendations though! 

wolf_garcia
6,617 posts
 

You need to get a vocal reinstatement device.

nevada_matt
155 posts
 

Pre-amp to sublime audio active crossover. (or equalizer then to xover)

sublime acoustic active crossover has
2 sub out (rca)   Make sure you set for single sub though if you only use one.

low out (yes … l/r rca)

mid/high out.  (yes .. l/r rca)

2x tekton 2x10 self powered at 300w. Fed from the 2 sub outs from the xover.

low outs to the m400 to lows on biamp speakers.

mid/high outs to m400a to mid/high on bi-amp speakers.

I run bi amp tekton Double Impact SE with single berylium center tweeter + the 2 tekton 2-10 subs.

You can order the active crossovers at the crossover frequencies and slopes you want. To change is just swapping a small board. Different/extra boards are like $12 so playing with different crossover points won’t break the bank.

https://sublimeacoustic.com/products/k231-stereo-3-way-active-crossover

 

 

More to discover