CAL Alpha DAC: Stock vs. 24/96 upgrade

Buda, When I read your posts you sure do make a case for the Alpha. As stated before, I'm still getting used to it. It really does have some characteristics I like a lot. I also own a CAL Icon Mk.II Powerboss which I really like too. Of course, I'm finding it's a different animal than the Delta/Alpha combo. I will probably tube roll before I decide on the 24/96 upgrade. I don't want to spend too much on tubes but it would be a good idea to at least try some out. Thanks for your help.
Kevin

I tried the Mullard's and didn't like it. Very syrupy, lacking in details. The Sylvania 5751's, though, provide a very clean, full, airy sound that was a revelation. I agree with the idea of playing with tubes before you throw down $500 for an upgrade that you will never be able to recover.

Kevin, When you take the cover off of the Alpha, there is the large metal piece/part inside. This is the transformer and is noticeably the most heavy part in the case. It is tall, comes about 1" short of where the top cover would be if the cover were back on. You should use a piece of styrofoam or even better a softer foam. This should be thicker than the space between the top of the transformer and the cover when it is put back on. This piece will then compress with the cover installed and hold the transformer in place to prevent its heavy wait from receiving shipping impact. Since the cover slides on it is fairly easy to do this.

What is known to happen without this is during shipping the box and components takes some real impacts when it is being tossed around and dropped. Due to the weight of the transformer these impacts cause cracks or total breaks to occur at the contacts or base of the piece.

If you ship the piece, you should always do this, but you also need to let the buyer know to remove it before playing. Many people don't know to do this and this is why so many of these units have been sold in good working condition, only to arrive not working at all - no power. I will check my office computer to see if I have a photo of this.

Kevin, I did some checking at my office to see if I took a picture of the support for the transformer - all packaing pics, but not of the unit opened with the support. I early stated it was Kevin with Approved Audio, it was really Larry. This is what he wrote to me when I sent mine in (and by the way, the unit will power up and even seemed to lock onto the signal - just no output):

". . . prior to shipping, i suggest removing the screws from the cabinet (4 on bottom, 3 on rear,
3 on top front) and sliding back the cabinet. you will see a large black thing in the front left corner-this is the power transformer.
take some cardboard or something similar and place some pieces on top of the transformer so that when you slide the cover back on, the cover will press against the transformer holding it in place. cal used a transformer which is not screwed to the chassis, it is held by the solder connections and some glue between the transformer and the circuit board. if the box gets dropped just right, the transformer can break loose. this is not a good thing. it doesn't happen often, but i've seen a couple. i always do this when i return ship them, and haven't run into a problem. it's cheap insurance. box it up, insure it for $1000 and send it in. it's a great sounding dac, i use one in my system."

Ckoffend, I understand completely what you're saying. I know what to do if I have to ship. I didn't understand your post from 2/20. It makes total sense now. I thought you were talking about something other than the proper packing for shipment. Thank you very much for the detailed explanation.
I'm not sure what direction I plan to take (keep or sell). There are so many posts from different listeners with different perspectives. One thing I learned; The Alpha is still a well appreciated piece of equipment to many in 2008. As mentioned to Buda, I will do some tube rolling before jumping into the $500.00 upgrade OR purchase of a used 24/96 Alpha. In the past I didn't have to think as much with SS units.
Thank you everyone for your posts.
Kevin Billig