2. analog
  3. 176296-3529

Technics SL 1200GR with What Cartridge???

I'm starting yet another thread on a similar topic, because I don't want to hi-jack someone else's thread, and I haven't found the answer to my question in other threads.

OK... I'm considering returning to vinyl for some of my listening and I need a Cliff's Notes version of what cartridges I might want to use.  

I've had a Linn Sondek LP12 for years, which I've barely used... but... it's been in storage.  As I recall it was pretty "finicky" and required a lot of attention to perform it's best (which was/is good).  I don't have enough patience anymore to deal with that, and am planning on moving to a Technics SL 1200GR, because it seems simple to operate, gets good reviews and doesn't seem to require a lot of attention. 

It appears that you can get great sound quality from the 1200GR with a good cartridge.  I'm just not sure what might be optimal / best for the money.

I also do not want to go crazy with esoteric cartridges that cost a mint.  My budget is probably in a range of... say... $300-400 to maybe $800-900 (if the cartridge is noticeably better than the more modestly priced cartridges).  

My Linn cartridge is a MM cartridge, I think (Basik or K9) in an Itok arm.  

That's about it.  

I'm not really interested in considering a lot of alternatives either in a turntable, or cartridges.  

Any guidance in this context would be appreciated.

bassdude
zazouswing
138 posts
 

My 1200GR sees a Hana ML and a Denon 103R for stereo. For mono it’s Miyajima. For the price, the 103R is a great cartridge. I run it through a SUT - Bobs Devices 1:40. The math doesn’t work but the sound is incredible. I’ve done the 103R with a 1:10 SUT and it was OK but not as dynamic (after compensating for volume). All tube gear after that - Decware phono preamp and Tektron EVO w/ 45 mesh plates currently. 
 

I know your focus is stereo, but I find where the 1200 really shows it’s stuff is at 78rpm. It’s based on a transcription motor. IMO, if a table can do 78 well, everything else should be easy. 

recordbore
7 posts
 

My Grado Sonata HO is sounding very nice after about 10 hours now. IMO, this would be an excellent choice especially since you play mostly acoustic type stuff.

I have a Denon 103. It sounded just OK on my Technics until I installed it a KAB damper.That tightened up the bass and cleared up the highs on the 103 making it much more engaging. On the other hand, the damper did nothing one way or the other for my Hana EL. The damper is a good investment if you are  planning to use a lot of carts.

I have used Miyajima for mono. I have a Premium for mono vinyl but prefer using a Phasemation. I do use a Miyajima Spirit for 78s. I mostly use the phono on my Luxman 507UX which is quite good. For 78s, I use a mono pre with different EQ settings.

tzh21y
1,654 posts
 

stanton 881

bassdude OP
460 posts
 

I guess I should also ask... what is the best value priced phono stage?

jagjag's avatar
jagjag
89 posts
 

I have an SL1200 Mk5 and use an AT 540ML and could not be happier. Solid sound presentation and easy to set up. Stylus replacement is easy and no worries about loading etc. Phonostage is the one inbuilt into my Parasound Hint 6 and speakers are JBL 4309.

More to discover