Power amplifier input sensitivity setting. 1.4V or 26db


Hi all,

I wanted to get your input on this subject.

I've got an old Crown CTs2000 powering two Peavey SP-5 speakers. My friend is using a Yamaha MG10 mixer; sending the (stereo outs) to the Crown balanced inputs.

The Crown has sensitivity settings ( 1.4V, 26db, 70V ); right now I have both channels' sensitivity settings at 1.4V.

Is that the proper sensitivity setting? 

I'm assuming the Yamaha MG10 stereo outs are Line Level.

 

Thanks for any input.

Ag insider logo xs@2xscratcha

Not a PRO guy but line level today is 2 volts or more, you should be good at 1.4 volts in. 

Post removed