2. cables
  3. 174147-81198

Power Cable Suggestions - Budget

I've read many times about the difference a power cable upgrade can make. I looked at some of the power cables that came with my amp, preamp, CDP, etc. and they do seem very cheap so thinking about buying some cables. I have Bryston pre and amp. Was thinking of maybe the 14 gauge Pangea or similar then I realized I am plugging into a power strip whose cable is likely junk and will need an upgrade here too (maybe 6 outlets). So in summary, I need a couple cables and a power strip that might result in the improvement that some of you claim. Thinking of keeping it in the 3-400 dollar range for all.

128x128peterhodo57
mesch
3,394 posts
 

Adhering to the question posed, I would try  running your amp directly into an outlet. 

I am using Pangea AC14se with my pre and source equipment. Likely not the best one could do but makes an improvement over stock.  Any chance of isolating the digital equipment from the  amp and pre?

nutty
2,659 posts
 

TheCableCompany- They have the Voodoo Cable Black Magic 6 foot for $295.00. 6 foot gives you more capacitance to quickly replentish the amplifiers large power supplies and capsitors. Call Steven and discuss some options but the Black Magic is a Massive 8 awg with very high quality build.

peterhodo57's avatar
peterhodo57 OP
11 posts
 

@mesch , The pre is a Bryston SP1.7 (processor). I have only one wall outlet with one socket available. I need a power strip of some sort before I start with PC's.

nutty
2,659 posts
 

This is the power strip I use in my Naim system. Sequentially wired, no lights or fuses, non current limiting, no on/off switches. All of the outlets share one ground eliminating any ground loops and noise. Deep-Cryo treated too. 

 

mesch
3,394 posts
 

In that case you could try plugging the amp into one outlet and a power strip into the other. Get a power strip with IEC input so you could use power cord of your preference. 

More to discover