Reel to reel , is it real the hype!

Got the otari 10 today , 1/2 inch 2 track with flux magnetic extended performance heads .
I hear immediately more power and presence in the presentation… played doors la woman and it was very good.
will update more incl pictures once I get to collect and listen to more music .
Already  hearing about scammers in the industry who sell reels made from digital sources and charge an arm and a leg . Finding authentic sources sounds like a challenge 

level match against the excellent system you already have, gain is always addictive!
have fun.
enjoy !

I have two Otari MTR 10's both 1/4" 2 track machines all completely stock, I had Studers in the past but; after hearing my first MTR I sold the Studer and bought a second MTR 10.. They sound fantastic in my all bit horn low powered tri amped system. I have over 60 copies of Master tapes @ 15ips IEC and nothing sounds better!!! 
I have a Redpoint Model D TT with a Triplanar arm and Soundsmith cartridge and hundreds of first press albums from the UK, and the tapes just absolutely destroy all of my vinyl. I also have the Tape Project Tapes and they are better than any vinyl I have.... You can't go wrong with getting into R2R!!!!! 

@jsman interesting observation but my experience so far is a little diff. I got master tape copies including from tape project … once I level match my digital and analogue systems the diff is very subtle … dsd copies sound pretty indistinguishable from reel … pcm don’t sound so good but still close …500$ tapes have a charm but dsd digital through my system is very very close /similar . Building an authentic master tape copy library is a great feeling for sure. 

two decks is a good way to go. And as one poster mentioned, making a play copy is not a bad way to go, since if its a fav piece of music, you can play it to death and simply make another copy if need be. 

For those of you with MTR decks (10 or 12) and stock electronics, here is a very simple change you can make. If you slide out the two audio cards from their rack rails, directly behind the card faceplate, you will find 6 0.1uf red kidney colored caps. These are bypasses on the rail voltages coming into the card. Replace all six on each card with 0.1uf Nichicon XY series foil and film cap. These nichicons can be sourced from mouser or digikey. will cost you about 12 -15 bucks in parts. when installed the new caps will remove a blanket that was covering your speakers. The stock caps were metalized film, not as open sounding as film and foil. Takes about 15 min per card to do the change. If you do not feel comfortable doing it, plenty of techs that can do the change for you.