1. Home
  2. analog
  3. 167065-159269

Sota Eclipse packages for VPI tables.

My VPI PLC died a few months back. I’ve since upgraded the motor to the 300 RPM motor, but have been looking to replace the PLC. Even used, the SDS and ADS are quite pricy and the reviews are mixed at best, especially with the ADS.

I ran across the Sota offering, which includes a DC motor and speed controller. It costs roughly the same as a used SDS. There’s also an optional tachometer .

Has anyone done this upgrade to a VPI or other non Sota tables? How did it work out for you?

Thanks for your consideration.
vinylzone
vinylzone OP
288 posts
 
Thanks for that. I have the TNT 4, which has the massive separate motor housing and separate flywheel.  Based on the drawings, the motor should fit but might require a small spacer between the motor and base, or maybe have a machine shop slightly deepen the motor well.
earthtones
116 posts
 
With this upgrade, I dramatically improved my Classic 4. The tricky part was figuring out what size belt to order from Origin Live, plus I had to rig up a custom motor mounting to get rid of plinth-transmitted noise.  Is your motor fixed or is it standalone? The job is easier if it’s the latter.
slaw's avatar
slaw
26,649 posts
 
My package came with the SOTA belt which works fine on my tt. I do plan on ordering an OL belt though.

@earthtones,

Yeah, I made some damping layers out of MyMat material and vinyl damping material from www.partsexpress.com

Much better isolation than stock. Which was a thin rubber O-ring.
lewm
14,707 posts
 
OP, are you saying the complete Eclipse package new costs the same or less than a used SDS? If so I’m very surprised and it’s a no-brainer in favor of Eclipse. I use the antecedent Phoenix Engineering controller on my Lenco, and it’s a big upgrade.
vinylzone OP
288 posts
 
@earthtones, Thanks.  It's the stand alone, extremely heavy motor, also a separate flywheel. 
More to discover