Need recommendations for 20' speaker cable


When I first moved in my place years ago, my speakers fired down the long wall in a rectangular room. The speakers were 5 ft out from the front wall and the rear wall was 12 ft behind my listening seat. My amplifier was between the speakers so the standard 10 ft run of cable was sufficient.

Currently the system is turned 90° and as shown in my Virtual System pics, the speakers fire down the short wall with my listening seat directly at the rear wall.

Out of curiosity, I purchased a 100 ft spool of generic speaker cable and moved my speakers to their old location. I knew this would happen but I immediately got more depth, more separation of instruments. More localization of musicians, etc.

I don't want to move my rack so if I keep it this way I'm going to need 20 ft of speaker cables. The fact that I now use monitors and the terminals are 2 ft off of the floor only worsens the situation regarding length.

So, long story long, I'm looking for recommendations on 20 ft speaker cables preferably under $1,000 new or used.

Thanks.
devilboy
The best speaker wire I know of for a 20 foot run is the Audioquest Rocket 44 PREMIUM No Frills version from AudioAdvisor.  It actually come in just under $1k:

https://www.audioadvisor.com/prodinfo.asp?number=AQPGRO44N&opt=3927|3933|3940|3944

Alternatively, you could do the normal "No Frills", but the PREMIUM has better spades/bananas.  If you can't get a combination of spades/bananas that you want, just call them.  They will custom make whatever you need.

https://www.audioadvisor.com/prodinfo.asp?number=AQRO44NF&opt=556|561|565|569


Solid core cabling always has done better.  The copper on Audioquest may not be OCC, but it's close.  I'd rather do this than use high grade stranded OCC copper.
I have a very well broken in pair of Groneberg cables.  They are 22 feet long, cost me $1500.00 for each cable.   I’ll give them away for $150.00 for the pair plus shipping.  They have the Groneberg spades at both ends and were soldered with Groneberg solder.  These were custom made for me.  I used them for 8 years or so.   If interested, send a PM. 
You can buy 20' sets from Blue Jean Cables (Canare 4S11), Kimber (many of them), Audioquest and I'm sure there are others.

I have used all 3 and believe BJC are great for the price and I preferred them to Audioquest Rocket 44.  If you would like to 'audition' Kimber and Audioquest (through Crutchfield) have satisfaction guaranteed return policies.

Get the Duelund 12 gauge wire.  No reason to only consider the cotton version as the Polycast sounds fantastic and costs far less.  It is a tad bit warmer and full bodied than the cotton.  Very close overall.  Here is the link.  A set will cost you $240 for the wire and $65 for these banana connectors which I strongly recommend. Use WBT 4% silver solder. 
https://www.partsconnexion.com/KLEI-83432.html

https://www.partsconnexion.com/DUELUND-84782.html

If you don’t have skills in this area I would be happy to help.  If spades are a must, then these are great for the money but not as neutral sounding as KLEI bananas. 
https://www.musicdirect.com/accessories/audioquest-p10m-premium-spades-ea