So I know there are electronic manufacturers and vendors that offer customers to take gear home to evaluate before purchase. Are there any cable manufacturers or cable vendors that offer the same? Seems reasonable...less risk of damage to the cables....I’d love to try, but am reluctant without an eval....
Best lower end cables for B&W speakers...?
Hello Everyone,
I’m relatively new to mid grade audio equipment and recently purchased a pair of B&W 702 S2’s and a HTM71 S2 center channel. To me, they are very clear and unforgiving speakers. I also use a Velodyne sub, but not all the time. So far I’ve been in love with them but am using borrowed speaker cable, straight 12 guage, to just try.
The Blue Jeans certainly seem reasonable enough, but in my head cables may be more speaker specific than a lot of other applications so I wanted to see if folks had used Canare 4s11 or some other cable that would be 500 and under per pair with their B&W’s. I can get these for 150 and certainly seem reasonable.
At 150, if they don’t work it won’t be the end of the world but figured I’d try here to see what people thought who had B&W’s
I’m relatively new to mid grade audio equipment and recently purchased a pair of B&W 702 S2’s and a HTM71 S2 center channel. To me, they are very clear and unforgiving speakers. I also use a Velodyne sub, but not all the time. So far I’ve been in love with them but am using borrowed speaker cable, straight 12 guage, to just try.
The Blue Jeans certainly seem reasonable enough, but in my head cables may be more speaker specific than a lot of other applications so I wanted to see if folks had used Canare 4s11 or some other cable that would be 500 and under per pair with their B&W’s. I can get these for 150 and certainly seem reasonable.
At 150, if they don’t work it won’t be the end of the world but figured I’d try here to see what people thought who had B&W’s
- ...
- 44 posts total
Hombre = troll. Thanks for the info...I purchase simaudio interconnects and have been super happy with them and may get their wires as well but it would be more than I wanted to spend right now for 3. I know each speaker and speaker range is different and I really feel like these could get bright with the wrong cable. I know I had my own personal experience with changing out cables in my guitar setup and they made a very big difference. I bought some that were not road worthy and gave me trouble. I replaced them with others and while more reliable...they were just too bright. I then replaced them, ironically, with Moogamis. It was one of the best investments I've ever made with regard to tone and reliability. I may eventually but some more expensive ones but thought I'd try some cheaper ones first. |
I've had nice results with Neotech. They make good quality occ cables in all price ranges both factory made and DIY. In Europe it's audiophonics that distribute at lowest price ( from what I have found) like https://www.audiophonics.fr/en/cables-hautparleur-conducteurs/neotech-nemos-3080-loudspeakers-cable-... Don't know who retail Neotech in USA but Google can help you there .. On another note, members like hombre of the flat earth society would be better of keeping the flat earth theories on their own forum! In my opinion.. |
Audioquest type 4 and be done with it. I would have them custom made at Audio Advisor. You can pick from any connector you want for both amp and speaker end and they will perform a high quality termination for you using silver solder. There is a dedicated guy there that does this all day long. The price is right for the "no-frills" type 4 AQ speaker cable. It is also a stereophile recommended component and has been for years. |
- 44 posts total