DAC as a preamp?


I need a new DAC. I use my computer for volume control, but do not trust it. I want separate volume control. The 90s me would have immediately thought preamp. But since I need a new DAC, my question stands ... DAC as a preamp?
I've posted more info about my system below.
I need some advice on the best way to go about getting volume control for these powerful asp1000 amplifiers. I've read about the high input impedance. I use a computer for my source playing Flac, wav or hi-res audio files. I'm using a very simple dongle Style USB DAC that sounds okay. I have choices, but do not know what my best bet is. For simplicity, it would seem I should just buy a better desktop DAC, such as and SMSL M500 and use the volume control knob on front. Or ANY other DAC with a volume control for that matter. I know I can use my volume control the USB. Provides through the keyboard on my computer. But with amplifiers this powerful, I figure I should have a volume control to prevent issues such as full volume noise blasts, which have happened before when the computer glitches. My second option would be to purchase a regular preamp. This would be the most expensive option, as I would want something at least as good as the Schitt Freya +, and that is $900! I would still need a decent DAC upgrade. This gets expensive with my health issues at hand. The last way I could go, is something like an all tube gain stage. I would still need a DAC, but a simple gain stage kit should only be a few hundred at most. The other two options I can think of, would be the pass B1 buffer clone kit preamp for 150 dollars, but I don't know if it would play nice with a high input impedance of the icepower amp. The most simple and cheapest route, would be be using the Sure digital volume control option. But I do not know how high fidelity that would be. I could really use some help. I've been out of this hobby for about 10 years now. I feel a bit lost and appreciate everyone who has helped so far.
flaxxer
@unsound .... 1 watt one meter. Those are nominal impedance numbers. BUT, none of my speakers dip much lower than 3.7 ohms. I KNOW they can be driven by a single watt. THIS IS WHAT SOME ARE MISSING ... The lower powered boards cost $600+, and were back ordered.... The 1000 watt boards are ON SALE for only $500 per pair, instead of the normal $770 per pair, and in stock. THIS is why I own these very powerful amplifiers. NO other reason.
Headroom is a good thing on digital amps. Huge headroom on Class AB amps can create noise issues (see Pro amps). But digital has a black background. SO I just need a way to control the volume, without degrading the sound quality, to prevent accidentally getting full volume, if my cat crosses my keyboard!
I’m fairly confident that you won’t have issues with the two lower sensitivity speakers, the higher ones might (?) be a bit more challenging. Still, with a 32 bit DAC you’ll have at least (!) 8 bits to spend without worry of bit stripping and each bit is worth about 12 dB of attenuation; that’s 96 dB worth of attenuation before bit stripping occurs. You might not get silence before bit stripping occurs, but the lowest levels will probably be well below critical listening levels. I say give it a try. The speakers will only draw the power it needs to handle the signal. While balanced certainly has it’s advantages, singled ended will be worth trying.
That would be awesome if this were so. I'll give it a try and we'll see what happens! Thank you very much
@flaxxer,

pls don’t go there. You definitely want analogue domain attenuation.
@antigrunge2 .... really? You can't just say that without leaving your top recommendation for what you're telling me is the best solution.