Replacement for Marantz AV8801: another prepro or receiver?


My 2014-vintage Marantz AV8801 prepro lost its HDMI audio -- was able to get it back (posted that elsewhere) but likely temporarily. 

Given that I'm planning an Atmos surround system, it's time for an upgrade, which is a shame because it's a great unit, but barely going for anything online and I wouldn't be comfortable in selling it or even donating it to Goodwill. So while it works, I'll try to figure out what to replace it with.

I currently only have a 3.0 system: I currently use the AV8801 to drive two B&W Nautilus 801s for the fronts via a recently acquired Parasound A21+ and a B&W HTM71S2 center with an old Nakamichi PA-7. Since I'm going to Atmos, the conundrum is whether to get another preprocessor: most likely an AV7706, which I'm assured has better processing and sound than the 8801; the 8805 doesn't support the latest standards without an upgrade that is not available and there's no 8806 on the horizon.

The alternative is a receiver like the Marantz SR8015 or Denon AVR-X6700H. All three came out within the last 6 months so they should support the latest standards.  I like the idea of 11 channels of amplification to deploy as I see fit.  If I go that way, I'd like to biamp the HTM71S2 center with two of the channels and use the rest for surrounds (exact configuration still to be determined). 

What I'm wondering is whether the amplification in these receivers is good enough for the surrounds, or whether I should just get the preprocessor and some configurable amplification like Emotiva with a high-power module for the center and lower-power modules for the ceilings and surrounds.  

Opinions?
128x128invaderzim
I've been using the Marantz 8801 as a preamp and enjoyed listening to it with two channel music or 3 channel video for movies. While a dedicated pre-amp might get me a little closer to nirvana, since I don't have a dedicated listening room (the kitchen is nearby) and we spend much more time watching movies and TV than critically listening to music, squeezing the last ounce out of 2-channel listening probably wouldn't be cost-effective. That said, I still have the Nakamichi CA-7A preamp from the 80s, so it'll be fun to swap that in to see how it sounds.  Given the age and the fact that it's never been serviced, I'll have to see.

I've seen comments that the preamp section in the top-of-the-line or near-top Denons outperform my 6-year old 8801 although the lesser power supplies cause me to question that. Still, I do like the way the 8801 sounds on 2-channel music so I hope that's true. I also believe the top-of-the-line units can disconnect the amps and only function as a pre-amp.
Regarding Anthem, teh room correction does look terrific, especially since I wouldn't have to run a super-long mic cable to my equipment cabinet.  However, my dealer doesn't carry it and other than custom install shops, there are no dealers nearby (according to the website).  It also looks like they're in the midst of a changeover to new products, releasing this month which have a lot of "coming soon" and no longer list PlayFI. HEOS is something that really interests me for playing lossless music like Amazon Music HD over the interwebs.  Integra has PlayFi, so that might be worth a look -- just haven't heard much about that brand.

Anthem also doesn't have an analog component video input (yes, I still have a VCR and have recently been using the Marantz to convert, upscale, de-interlace and capture family video using a cheap HDMI capture device -- still a work in progress).

Anyway, thanks...
we spend much more time watching movies and TV than critically listening to music
Under these circumstances I’d just get a good AVR and call it a day.  I don’t think it’s worth the added hassle/expense of buying a prepro and separate amplification.  If you’d appreciate a little more transparency, detail, and reliability I’d go with a Yamaha RX-A2080 or 3080, but if you like the warmer, fuller Marantz sound just stick with one of their AVRs.  And you should definitely try the Nak preamp — could be very interesting. 

I had an 8801 with marantz multi channel amp. then traded up to 8802 so I could use Atmos. I finally sold that and upgraded to a Trinnov Altitude which of course is much more expensive. Although the Marantz never gave me any problem and sounded fine, I’m through with Marantz (or any other manufacturer that doesn’t upgrade their products and make you buy new units when upgrades are available.) The trinnov allows for upgrades so that is why I went that direction as well as much superior Sonics. I also traded my Marantz amp for an ATI 8 channel which is better as well.
+1 soix

If movies are the main consideration, I would also save money and just get an AVR, one that has the features that you require, such as being able to hand the VCR and the Edison Cylinders and whatever else you might have in your Aladin's Cave