How are phono cables different (related to hum issue)?

Actually the Blue Jeans Cable, LC-1 might not be the best choice for some phono cartridge to pre-amp input combinations. In some cases the total cable capacitance can affect the high frequency response of the combination. The LC-1 has less than 1/3 the capacitance of many common TT cables.

The Blue Jeans cables are a good value, but they can rob the music of some of its life.  They are a good option for turntable use because of their low capacitance.  Depending on the level of your turntable and system, you may find them a little "soft" and lacking some high end detail.  I've noticed that even more with their speaker cables.  For things where cables matter less, like a subwoofer, they are more than good enough.  I can't detect any noticeable difference between their digital coaxial cables and more expensive ones.  Their interconnects are OK, but you should notice better sound quality with better quality cables.

As others have mentioned, there could be an issue with the cable itself.  I had some very expensive Kimber Cables that I purchased second hand based on positive experience with some of their similar interconnects.  They were a fail with my turntable (bad hum).  I returned them and was told they were fine, other than a loose screw that held the shielding in place.  I replaced them with some Kimber Kable TAK-Cu cables (which were about 1/3 the price) and now everything sounds great with no hum.

Hi @big_greg that's interesting. I'm using their Canare (not Belden) option for both my Tannoy & Zu (speaker cables). The former bi-wired. Anyhoots so far so good. I'll try my Pangea phono cable again tmrw to do a better A/B other than just the BJs are quieter. I'm using many of their ICs now also, so many I'll be listing my others soon. 

Hi @speedskater  also interesting, I'll re-insert the Pangea and do a proper A/B. 

@scott_w  I should add a "YMMV" disclaimer.  Those observations are in my system, with my ears, and my listening preferences.  I've tried a lot of different cables and generally don't notice huge differences (if any) between better quality cables, but I do notice that when using entry level cables, they can make things sound worse than they could.

Well after re-inserting my Pangea phono cable this morn, it sounds better than the BJs and there's no hum. The only change I made was to my amp's (rebuilt Dynaco) power cord. Yesterday out of the blue it started blowing fuses, went through 2, and removed the Anticables cord with a nos western electric pc. So far so good. I wonder if the anti was adding hum? And/or doing something weird to the power, or ground? No blown fuses today, after 3 hrs of nonstop vinyl. 

ps thanks all for chiming in to help me.