Ethernet cables

I heard a significant improvement in SQ after changing from CAT6 to Supra CAT8. Conductors are separately shielded.
https://www.ebay.com/c/1640631596

@c_avila1 
Very interesting. I've researched using a LPS for a router, but never found conclusive evidence of improved SQ. I have a Verizon unit.

Not me.

hey i have used shunyata ethernet cables over stock and found very big improvements in sound coming from my digital rig.  the improvement was so much that i ended up buying the omega e/net cable.  

a LPS on the router also made a massive difference in my setup.

weirdly this was even when the e/net cable was connecting to a server which was not streaming music (music is on hard disk on server).  it seems noise comes in via the e/net cable in my system and shunyata cables helped with that.  

the difference the cables made were those standard things when noise is lowered (biggest impact on bass and mid-bass i find).

i did try a reunion cat 8 cable which was much cheaper than the shunyata cables.  it was okish but as you indicate sort of gave the sound a stripped out hollowness which was unpleasant.  i went back to stock rather than use that.

@mr_gray,  what LPS are you using with your router? It seems like a nice upgrade to your system.

I wonder if it's helping reduce RFI. The coax feed and the router are full of RFI, as is the wall-wart.

@lowrider57 I use an Uptone Audio JS-2 power supply which has dual output. Therefore, the modem and router were upgraded simultaneously with the introduction of the single JS-2 unit. The point is to remove wall warts out of the system.