New Linear Parasound Halo JC1+ monoblocks, an even more improved new John Curl design

Amen to that!

Hypex NC1200 amp module does 1200 watts into 2 ohms

Please please! show "independent" testing of the rms wattage’s for 8ohm, 4ohm, and 2ohm loading, that will show, instead of this smoke screen you’ve thrown up.

Here are just from 8ohm to 4ohm hardly doubling
Power rating (per channel)
620W @ 8ohm
700W @ 4ohm
no mention of 2ohm loading wattages
http://www.apollonaudio.com/apollon-audio-as1200-class-d-ice-power-based-amplifier/

Then for something else, there’s the phase shift down into the audio band. https://ibb.co/Wp8qnKp

No smoke screen....just the published numbers. I mean, who cares if it only does 1100 watts into 2 ohms at 1% distortion? Still plenty of power for 95% plus of the high end speakers. The only thing that matters is how it sounds and will it drive a particular speaker to the levels you want.

Your audio phase shift measurement for the IceEdge module means nothing (already pointed out time and time again) and it is not even for this particular amp module. You are confused. This is the Hypex NC 1200 module....not the IceEdge 1200AS1/2 module that I am referring to. What you quoted above was for the IceEdge module.

Please people, listen for yourself!.....do not trust anyone’s opinion about anything....including mine.

By the way, I measured 1000 watts into 2 ohms with the mono IceEdge 1200AS1 module (The mono modules are the ones I used in my amps). The stereo module (1200AS2) puts out less power into low impedances as there is just one power supply for both channels.

BTW, You can buy mono block amps using these same NC1200 modules, same Hypex 1200 watt supply and Weiss op amps from VTV for $3000 the pair ($2600 with best Sparko Labs input op amp). Not as good of output wiring and output connections, nor chassis nor linear power supply for op amps. Still, a wonderful value. These modules are the same as what Mola Mola uses in their $17K mono blocks. The Mola Mola uses Bruno Putzeys discrete input stage while the VTV and Apollon use the Weiss discrete input stage.

https://vtvamplifier.com/product/vtv-amplifier-monoblock-hypex-nc1200-ncore-amplifier-1200w-with-vtv-buffer-input/

If you want the stock op amp buffer built into the NC1200.....then a pair is $1800.....Dang! Even with the stock op amp it sounds really good. The Atsah amps sold 6 years ago for $9K using the stock input buffer.

http://www.10audio.com/acoustic-imagery_atsah.htm

Doesn’t matter what is said here above about Class-D by some that have vested interests in them.
There is no way in the world it can compete against these Parasound Halo JC1 or the JC1+ when driving speakers such as the Wilson Alexia many of the higher end B&W’s, fact!
Cheers George