2. analog
  3. 152664-96030

Cartridge Headshell Match

I recently purchased a Technics SL1200 GR.  

I currently have an Ortofon MC Rondo Red mounted.

I plan on getting another Headshell and mounting a Benz Micro Glider that I just had re-tipped on it.  

I noticed some headshells have azimuth adjustment which would be nice but weigh around 12 grams. 

I can get a technics style headshell with no azimuth adjustment that weighs around 7.6 grams.

The Benz Glider weighs  6.6 grams

The Ortofon MC Rondo weighs 10.5 grams and sounds great with the stock Technics headshell.  

 The Benz is lighter in weight than the Ortofon by almost 4 grams so would that better mate with a heavier headshell?

I know this subject has been covered many times before but it still confuses me a bit.
nicktheknife
mijostyn's avatar
mijostyn
8,159 posts
 
Don't assume that, you never know for sure until you test it. You want  bright light and watch the cantilever carefully. When you hit the resonance point the cantilever will start shaking. for the lateral watch the cantilever from the front. For the vertical watch the cantilever from the side. Have fun!

Mike
nicktheknife OP
194 posts
 
Thanks for the pointers Mike.
hdm
1,055 posts
 
It appears they do! I stand corrected.
donvito
393 posts
 
That tonearm has a mass of 9 grams!
https://www.audioappraisal.com/technics-sl-1200gr-sl-1210gr-turntable-review/
donvito
393 posts
 
Put the information in this chart to find the resonance frequency of the arm and cartridge capability!
http://www.mh-audio.nl/Calculators/RF.html
More to discover