Upgrading HT and 2channel stereo


Hello,
  New to Audiogon’s forum, but seems like a proper place to discuss audio topics, so here goes...

   Will be replacing my 2008 Onkyo TX-NR906 (AVR) and looking for suggestions on components.  Leaning towards separates such as a multichannel amp and AV processor for HT application and an integrated amp to run the front L & R speakers for stereo.  Welcome other configurations, but would like to keep costs for these three separates below 10k.

   Equipment I will be using with new components:

   Speakers-front left, right, and center are Sonus Faber Domus Concerto     
    Rear speakers are Totem Limks
    Sub is a REL R-505

  Existing components that will be retained and used include Oppo BDP-103D; basic Roku box, cable box and a LG OLED C9 TV.  

  Components I’m considering, but not set on include the following:
    AVR:  Anthem MRX1120
     AV pre pro:  Anthem AVR 60, Marantz 8805
    Multi channel amp:  Parasound A51/52/52+; NAD M27; Classé Sigma 5

  integrated amps:  Hegel; Rega Elicit R; Anthem STR

  welcome thoughts on this upgrade project including other brands including ATI, Emotiva, etc.  thanks in advance, Mike
128x128ironmike
Anthem has a very good room correction system that may be something to consider. 
Sorry to disagree with Mijostyn, but there are way better ways of doing this and using the MRX Receiver with a higher quality power amplifier.

The idea of the receiver to power the center and rears is a good one, the area where we would differ, is to use a high quality intergrated amplifier with a home theater bypass function, along with a high quality dac/streamer. 

The reason is simple any surround sound processor does a poor job as a two channel preamplifier/dac. The reason is simple economics, a surround receiver has 5-11 channels of preaplification, 5-11 channels of dacs, Dolby and DTS decoders along with a video switcher, way too much circuity that generates noise is being injected into the music signal.

For this reason a pure two channel integrated will often sound far more dimensional with better resolution than the surround sound receiver even with a good power amplfier. The Parasound A21+ is a good power amplifier and even with the excellent Anthem Receivers, for music a Coda, Hegel, Luxman, Naim, Unison Reseach integrated will offer a far more realistic recreation of  a music event than the other setup.

Dave and Troy
Audio Doctor NJ Dealers for Anthem, Parasound, Coda, Unison, Naim, 
Hi Audio Doc, I often wish you would provide an idea of the pricing for the items that you recommend. Its obvious that there will be better sounding gears as one spends more for their equipment, but by your providing some guestimates of prices it will give the reader some general idea where the items you recommend fall on the affordability/diminishing returns curve which in turn will give some real world help to the reader making a decision.
If what I posted sounds a little snarky its not meant to.  Its just it seems that having no dollar references gives only half the story. 
This dialogue has been extremely beneficial laying out a solid framework from which to proceed.  Given monetary limitation, I may need to rethink whether an integrated amp is within the budget.  I would love to have the ability to pass thru/bypass; hence my desire to purchase an integrated amp for reasons Audio Doc indicated above.  Would relish Coda, Pass Labs, Moon, Etc, but just can’t allocate the $$ for new.  Used?  Welcome any suggestions if I should consider the less boutique makers like Emotiva, ATI or continue to set aside additional funds for a few more months. 
  Thanks all for your assistance.